64423
46
Zoom out
Zoom in
Previous page
1/96
Next page
38 OL-10806-02
Pressing PickUp and GPickUp connects you to the call that has been ringing for the longest time.
Pressing OPickUp connects you to the call in the pickup group with the highest priority.
If you have multiple lines and want to pick up the call on a non-primary line, first
press
(Line View) to switch to the desired line, then choose Options and a Call PickUp
softkey.
Storing and Retrieving Parked Calls
You can park a call when you want to store the call so that you or someone else can retrieve it from
another phone in the Cisco Unified CallManager system (for example, a phone in a conference room).
You can park a call by using the Park softkey to store the call. Your phone displays the call park
number where the system stored your call. You must record this number and then use the same number
to retrieve the call.
Tip
You have a limited time to retrieve a parked call before it reverts to ringing at the original number. See
your system administrator for details.
Logging Out of Hunt Groups
If your organization receives a large number of incoming calls, you might be a member of a hunt group.
A hunt group includes a series of directory numbers that share the incoming call load. When the first
directory number in the hunt group is busy, the system hunts for the next available directory number
in the group and directs the call to that phone. When you are away from your phone, you can prevent
hunt group calls from ringing your phone by logging out of hunt groups.
Tip
Logging out of hunt groups does not prevent non-hunt group calls from ringing your phone.
If you want to... Then...
Store an active call
using Call Park
1. During a call, choose Options > Park.
2. Note the call park number that displays on your phone screen.
3. Press the .
Retrieve a parked call Enter the call park number from any Cisco Unified IP Phone in your
network to connect to the call.
If you want to... Then...
Log out of hunt groups to temporarily
block hunt group calls
Choose Options > HLog. Your phone screen displays,
“Logged out of Hunt Group.
Log in to receive hunt group calls Choose Options > HLog.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 7921G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 7921G in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info