63853

Cisco 524G Manual

7
Zoom out
Zoom in
Previous page
1/18
Next page
7
• Press Redial to dial the last number, or press the Navigation button (with the phone idle) to see your Placed Calls.
• If you are placing a call while another call is active (using the same line), press the Hold button, and then press New Call
and enter the number.
• If you are dialing from the Setup, choose Call History and select Missed Calls, Received Calls, or Placed Calls.
• If you are dialing on-hook, without a dial tone (predial), enter a number, then lift the handset go off-hook, press Dial, ,
or .
Note Use the backspace (<<) soft key to erase digits that you enter incorrectly.
Additional Options—Place a Call
To place a call while another call is active (using a different line):
1. Press the line button for a new line. The first call is automatically placed on hold.
2. Enter a number.
Answer a Call
Use one of the following methods to answer a call:
• Press to answer with a headset, if unlit. Or, if is lit, press Answer.
• Press to answer with the speakerphone or press Answer.
• Press Answer to switch from a connected call to answer a new call, or, if the call is ringing on a different line, press the line
button.
• Press Answer to answer a call using call waiting.
• Press DnD to send a call to your voice messaging system.
End a Call
Use one of the following methods to end a call:
• Hang up the handset or press EndCall.
• If you are using a headset, press . Or, to keep headset mode active, press EndCall.
• If you are using a speakerphone, press or EndCall.
• Press EndCall to hang up one call, and preserve another call on the same line. If necessary, remove the call from hold first.
Hold and Resume a Call
Engaging the Hold feature typically generates music or a beep to the caller.
To put a call on hold, use the following method:
1. Make sure the call you want to put on hold is highlighted.
2. Press the Hold button.
To remove a call from hold on the current line, use the following method:
1. Make sure the appropriate call is highlighted.
2. Press Resume.
To remove a call from hold on a different line, press the appropriate line. If a single call is holding on this line, the call
automatically resumes. If multiple calls are holding, scroll to the appropriate call and press Resume.
Mute a Call
With Mute enabled, you can hear other parties on a call and they cannot hear you. You can use Mute in conjunction with the
handset, headset, or a speakerphone.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 524G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 524G in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info