64709
23
Zoom out
Zoom in
Previous page
1/106
Next page
1-7
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
OL-14029-01
Chapter 1 An Overview of the Cisco Unified IP Phone
What Features are Supported on the Cisco Unified SIP Phone 3911?
What Features are Supported on the Cisco Unified
SIP Phone 3911?
The Cisco Unified SIP Phone 3911 functions much like digital business phones,
allowing you to place and receive telephone calls. In addition to traditional
telephony features, the Cisco Unified IP Phone includes features that enable you
to administer and monitor the phone as a network device.
This section covers the following topics:
Feature Overview, page 1-7
Configuring Telephony Features, page 1-8
Configuring Network Parameters Using the Cisco Unified IP Phone, page 1-8
Providing Users with Feature Information, page 1-9
Feature Overview
Cisco Unified IP Phones provide traditional telephony functionality, such as call
forwarding and transferring, redialing, speed dialing, and voice messaging system
access. Cisco
Unified IP phones also provide a variety of other features. For an
overview of the telephony features that the Cisco
Unified IP Phone supports and
for tips on configuring them, see the
“Telephony Features Available for the Cisco
Unified IP Phone” section on page 5-1.
As with other network devices, you must configure Cisco Unified SIP Phone 3911
so that it can access Cisco Unified Communications Manager and the rest of the
IP network. By using DHCP, you have fewer settings to configure on a phone, but
if your network requires it, you can manually configure an IP address, TFTP
server, and subnet mask. For instructions on configuring the network settings on
the Cisco
Unified IP Phones, see Chapter 4, “Configuring Settings on the Cisco
Unified IP Phone.
Finally, because the Cisco Unified IP Phone is a network device, you can obtain
detailed status information from it directly. This information can assist you with
troubleshooting any problems users might encounter when using their IP phones.
See
Chapter 6, “Viewing Status, Statistics, and Firmware Information on the
Cisco Unified IP Phone, for more information.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco 3911 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco 3911 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info