18
9.1.9 STARTING TRACK GUIDANCE DIRECTLY
With «Start track guidance directly» the recording of the activity is started without any changes.
You will receive directions in the map view, but no beeps for turns or distances. Select «Start track
guidance directly» and tap on «OK». Now you can decide whether you want to be guided to the
start of the activity or the nearest point on the track, taking your current position into account.
NOTE:
This procedure is especially recommended if you want to follow a track of 100%.
9.1.10 SET STARTING POINT
If you have selected «Convert Track to Route», the «Route» will first be calculated and displayed
on the map. By clicking on «Route» or «Track» you can switch between the «Track» and the route
in the map view. The «checkered flag» shows the destination of the activity. To start route
guidance using the alternative route, select «Route» and tap to «Navigation».
To start route guidance using the alternative route, select «Route» and tap on «Navigation».
To keep the original route and start track guidance without turning instructions, select «Track» and
tap «Navigation». Now you can decide whether you want to go to the starting point of the track or
the nearest point, taking your current position into account
10. EXTRAS
Under «Transferred Tracks» you will find all tracks that you have transferred to your device.
Here you can also delete imported tracks from your device. You can search for the name of a track
by tapping .
If you select a track and tap View Tour, you will see a detailed view of the track.
Tap on «Start Tour» to start the route guidance.
If you start the track directly from the beginning of the route, you also have the possibility to decide
whether you want to start the track directly or have it converted into a route to receive turn-by-turn
instructions via beeps. You can also choose whether you want to begin at the starting point of the
track or the point of the track nearest to your position.
NOTE:
It is recommended to convert the track into a route if the transferred track contains only a few track
points or if you prefer to be guided on the road network. To edit a transferred track, tap on in the
detailed view .
The following options are available:
Reverse track – changes the direction of the track.
Change name – here you can change the name of the route.
Delete route – deletes the route from the device.
11. WAYPOINT MANAGER
Waypoints can be selected, created and deleted here.
11.1 SELECT WAYPOINT
To create a waypoint, you have several options. You can use the
current position, enter an address, select a position on the map,
select one of the last destinations, enter coordinates or select a POI.
Once the destination is defined, you will be prompted to enter a
name for the new waypoint.
In the name line the address or the geocoordinates of the waypoint
will be displayed automatically. However, it is recommended to assign
a name to each waypoint, especially if several waypoints have already
been created.
You can change the name by pressing the «backspace» key long
and entering another name. Confirm the name. The waypoint is saved.
