588930
8
Zoom out
Zoom in
Previous page
1/15
Next page
The following applies for all sub-functions:
Sub-functions are displayed for 10 seconds, then the main function
appears again. To premature quit the sub-function, press short the
UL- or LL-button.
5. 1 Upper display indications
Main functions are chosen with UR-button, sub-functions with UL-
button. To better distinguish main functions from sub-functions,
main functions are printed in a bold script and sub-functions are
printed in a bold, cursive script.
Speed
(only in Bike mode and Ski mode)
Indicates the current speed in km/h
(or mph = miles per hour).
Following applies only in Ski mode: Calculates
the speed out of the current decreasing (dis-
played speed can vary up to ±10% ; the more steeply or levelly the
slope, the more can the value vary).
Range: 0 - 199,9 km/h or 124,2 mph
Average speed
(only in Bike mode and Ski mode)
Sub-function of function ‚Speed‘.
Indicates the average speed
(of the bike adjusted).
Range: 0 - 199,9 km/h or 124,2 mph
Total average speed (bike 1 and bike 2)
(only in Bike mode and Ski mode)
Sub-function of function ‚Speed‘.
Indicates the calculated average speed of bike
1 and bike 2.
Range: 0 - 199,9 km/h or 124,2 mph
Maximum speed
(only in Bike mode and Ski mode)
Sub-function of function ‚Speed‘.
Indicates the maximum speed reached with the
adjusted bike.
Range: 0 - 199,9 km/h or 124,2 mph
Maximum speed bike 1 or bike 2
(only in Bike mode and Ski mode)
Sub-function of function ‚Speed‘.
Indicates the absolute maximum speed
reached and also the bike with which it was
achieved.
Range: 0 - 199,9 km/h or 124,2 mph
Current heart rate
Setting range: 30 to 240 bpm
(beats per minute; if value is over 200, the last
digit is displayed on the comma digit of the
upper display)
Indicates the current heart rate.
Note: Heart rate functions can only be indicated with the HAC
, if the accompanying transmitter belt is worn.
The heart rate functions have an energy-saving mode: if no signal is
received within a period of approx. 5 minutes, the heart rate receiver
of the HAC switches off automatically (symbolheart‘ in the
display disappears). To reactivate the heart rate receiver , choose
again the function ‚Current heart rate‘ in the display.
Average heart rate
Sub-function of function ‚Current heart rate‘
Indicates the average heart rate.
Range: 30 to 240 bpm
Maximum heart rate
Sub-function of function ‚Current heart rate‘
Indicates the maximum heart rate.
Range: 30 to 240 bpm
Recuperating heart rate
Sub-function of function ‚Current heart rate‘
Indicates the recuperating heart rate (see
chap. 6.3).
Recuperating heart rate is the heart rate
measured 3 minutes after the recuperating
heart rate function is started (press UL- and
LL-button short and simultaneous). After 3 minutes a short signal
tones, when the measuring ends. The display indicates the heart
rate measured at start of this function and below the recuperating
heart rate (measured after 3 minutes).
Range: 30 to 240 bpm
Current ascent / descent
(only in bike mode)
Indicates the current ascent or descent ridden
at the moment (in %). The arrow on the right
side of the display indicates if an ascent or a
descent is measured.
Range: 0% to 99%
Note: Technically restricted the correct value is indicated a few
seconds after the beginning of the ascent/descent.
After stopping (speed = 0) the last value remains in the display.
Average ascent
(only in bike mode)
Sub-function of function ‚Current ascent/des-
cent
Indicates the average ascent of the current tour.
Range: 0% to 99%
Average descent
(only in bike mode)
Sub-function of function ‚Current ascent/des-
cent
Indicates the average descent of the current
tour.
Range: 0% to 99%
Maximum ascent
(only in bike mode)
Sub-function of function ‚Current ascent/des-
cent
Indicates the maximum ascent of the current
tour.
Range: 0% to 99%
Maximum descent
(only in bike mode)
Sub-function of function ‚Current ascent/des-
cent
Indicates the maximum descent of the current
tour.
Range: 0% to 99
Current gain or loss in altitude
(Variometer function)
Indicates the current gain or loss in altitude in
meters/ft x10 per minute. The arrow on the
right side of the display shows if it is an ascent
or a descent.
Range: 0 to 199 m/min resp. 0 to 65 ft x10/min
Note: Technically restricted the correct value is indicated a few
seconds after choosing this function.
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo HAC 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo HAC 4000 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo HAC 4000

Ciclo HAC 4000 User Manual - German - 16 pages

Ciclo HAC 4000 User Manual - Danish - 15 pages

Ciclo HAC 4000 User Manual - French - 15 pages

Ciclo HAC 4000 User Manual - Italian - 15 pages

Ciclo HAC 4000 User Manual - Polish - 8 pages

Ciclo HAC 4000 User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info