588935

Ciclo CM9.3A plus Master Manual

12
Zoom out
Zoom in
Previous page
1/18
Next page
|
12
3.6.9 MAX HR limit
Please note: If you use CICLO
InZone
®
you don’t need to change the Lower/Upper/Max HR.
Here you can change the upper heart rate limit.
Set with the middle and right button, store with left button.
3.7 Sensors
You can connect different ANT+ sensors to the CM 9.3 A (+). To use an ANT+ sensor, you first have to
initialize it.
3.7.1 How to initialize a sensor
In the main menu press the left or the right button until SENSORS is displayed, continue with middle button.
You can use the following sensor types with the CM 9.3 A
Select the sensor you want to initialize and press the middle button.
Now INISCAN is displayed in the lower display.
Now please make sure that the sensor starts to send. Put on the heart
rate sensor or move the crank or Wheel. Press the left and right button
simultaneously to start the sensor search. As soon as the sensor is found, the CM 9.3 A will display
“connected” in the bottom line. If no sensor of the selected type can be found it shows “fail”
In the sensors menu a check mark after the sensor type shows that a sensor has been initialized.
To remove a sensor go through the above procedure and make sure that no sensor is near. After the search
failed the sensor that was initialized before will be deleted and the check mark disappears.
3.7.2 Power measurement calibration
If you use a power sensor that requires a calibration, select power in the sensor menu and press the middle
button. When INISCAN is displayed, press the right button to enter calibration mode. Press the middle but-
ton to start the calibration. The CM 9.3 A will show “Success” in case the calibration was successful.
Chapter 3 – settInGs & fIrst start
Speed
Cadence
Combo Sensor (Speed./Cadence)
Heart rate
Power measurement
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM9.3A plus Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM9.3A plus Master in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM9.3A plus Master

Ciclo CM9.3A plus Master User Manual - German - 18 pages

Ciclo CM9.3A plus Master User Manual - Italian - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info