588935

Ciclo CM9.3A plus Master Manual

9
Zoom out
Zoom in
Previous page
1/18
Next page
|
9
Chapter 3 – settInGs & fIrst start
3.3.4 Bike weight
Next you can adjust the weight of your bike in kilograms. This value is used for power calculation (see 3.3.7.)
Set with the middle and right button, store with left button.
3.3.5 Unit
Now you can set the unit used in the computer, km for kilometers or mi for miles.
Set with the middle and right button, store with left button.
3.3.6 Cadence
If you want to use the cadence, activate the cadence function.
Please note that you need a cadence sensor for this function.
Set with the middle and right button, store with left button.
3.3.7 Power measurement
The CM 9.3 A can display power in 2 ways. Actual measured power of an ANT+ power sensor or theoretically
calculated power.
Calculated power
In case the power function is activated and no ANT+ power sensor is initialized, the computer calculates the
power from the following values:
- Speed
- Bike and rider weight
- Rate of climb / rate of fall per hour
Please note that this calculation only shows approximate values.
Whenever the calculated power is shown in the lower display, the value is shown with a P for power.
Measured power
To display measured power you need an ANT+ compatible power sensor and initialize it (see 3.7.1)
If an ANT+ power sensor is connected and initialized, the CM 9.3A (+) will display the power values received
from this sensor.
Whenever the measured power is shown in the lower display, the value is shown with a W for Watts.
3.3.8 Power measurement interval
For better readability, the displayed, measured power can be averaged over different intervals. Please refer to
the following table for the available Pow Avg values.
Set with the middle and right button, store with left button.
Seconds Smoothing
1 Each measured value is displayed
3 Average of the last 3 seconds
10 Average of the last 10 seconds
30 Average of the last 30 seconds
3.3.9 Power measurement left & right
If you use a power measuring system which can measure the power of the left and right leg separately,
switch LR Pwr to ON. Otherwise leave it off. If provided by the power sensor, the left and right power can be
displayed in percent of the total power.
Set with the middle and right button, store with left button.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM9.3A plus Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM9.3A plus Master in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM9.3A plus Master

Ciclo CM9.3A plus Master User Manual - German - 18 pages

Ciclo CM9.3A plus Master User Manual - Italian - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info