Manual Ciclo CM9.3A Master (page 12 of 18) (English)

588934

Zoom out

Zoom in

1/18

3.6.9 MAX HR limit

Please note: If you use CICLO

InZone

you don’t need to change the Lower/Upper/Max HR.

Here you can change the upper heart rate limit.

Set with the middle and right button, store with left button.

3.7 Sensors

You can connect different ANT+ sensors to the CM 9.3 A (+). To use an ANT+ sensor, you ﬁrst have to

initialize it.

3.7.1 How to initialize a sensor

In the main menu press the left or the right button until SENSORS is displayed, continue with middle button.

You can use the following sensor types with the CM 9.3 A

Select the sensor you want to initialize and press the middle button.

Now INISCAN is displayed in the lower display.

Now please make sure that the sensor starts to send. Put on the heart

rate sensor or move the crank or Wheel. Press the left and right button

simultaneously to start the sensor search. As soon as the sensor is found, the CM 9.3 A will display

“connected” in the bottom line. If no sensor of the selected type can be found it shows “fail”

In the sensors menu a check mark after the sensor type shows that a sensor has been initialized.

To remove a sensor go through the above procedure and make sure that no sensor is near. After the search

failed the sensor that was initialized before will be deleted and the check mark disappears.

3.7.2 Power measurement calibration

If you use a power sensor that requires a calibration, select power in the sensor menu and press the middle

button. When INISCAN is displayed, press the right button to enter calibration mode. Press the middle but-

ton to start the calibration. The CM 9.3 A will show “Success” in case the calibration was successful.

Chapter 3 – settInGs & fIrst start

Speed

Cadence

Combo Sensor (Speed./Cadence)

Heart rate

Power measurement

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM9.3A Master in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM9.3A Master

Ciclo CM9.3A Master User Manual - German - 18 pages

Ciclo CM9.3A Master User Manual - Italian - 18 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ciclo CM9.3A Master Manual

Product: