Manual Chrysler PT Cruiser - 2004 (page 16 of 341) (English)

693224

Zoom out

Zoom in

1/341

All of the keys provided with your new vehicle have

been programmed to the vehicle electronics.

Replacement Keys

NOTE: Only keys that have been programmed to the

vehicle electronics can be used to start the vehicle. Once

a Sentry Key has been programmed to a vehicle, it can

not be programmed to any other vehicle.

At the time of purchase, the original owner is provided

with a four digit PIN number. This number is required

for dealer replacement of keys. Duplication of keys may

be performed at an authorized dealer or by using the

Customer Key Programming procedure. This procedure

consists of programming a blank key to the vehicle

electronics. A blank key is one which has never been

programmed.

NOTE: When having the Sentry Key Immobilizer

System serviced, bring all vehicle keys with you to the

dealer.

Sentry Key Programming

You can program new keys to the system if you have two

valid sentry keys by performing the following procedure:

1. Cut the additional Sentry Key Transponder blank(s) to

match the ignition switch lock cylinder key code.

2. Insert the first valid key into the ignition switch and

turn the ignition switch ON for at least 3 seconds but no

longer than 15 seconds. Turn the ignition switch OFF and

remove the first key.

3. Insert the second valid key and turn the ignition

switch ON within 15 seconds. After ten seconds a chime

will sound and the Theft Alarm Light will begin to flash.

Turn the ignition switch OFF and remove the second key.

16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chrysler PT Cruiser - 2004 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chrysler PT Cruiser - 2004 Manual

Product: