Manual Christopeit XL 2000 (page 12 of 48) (English, German, Dutch, French)

793212

Zoom out

Zoom in

1/48

Assembly Instructions

Remove all the separate parts from the packaging, lay them

on the oor and check roughly that all are there on the base of

the assembly steps.

Please note that a number of parts are connected directly to

the main frame preassembled. In addition, there are several

other individual parts that have been attached to separate

units. This will makes assembly easier and quicker for you.

Assembly time: 30 min.

Step 1:

Attach the stabilizer (4+15) at main frame (16).

1. Attach the front foot (15) with the preassembled transport rollers

(56) to the main frame (16). Do this with the two screws M10x90

(3), washers 10//20 (5) and cap nuts (6).

2. Attach the rear foot (4) to the main frame (16). Do this with the

two screws (3), washers (5) and cap nuts (6).

After assembly has been completed, you can compensate for

minor irregularities in the oor by turning the wheel at rubber feet

(14). The equipment should be set up that the equipment does

not move of its own accord during a training session.

Step 2:

Attach the saddle (13) and saddle support tube (10).

1. Push the saddle support tube (10) into the matching locator in

the main frame (16), set it at the desired position and lock it by

inserting the bolt with the quick release (7) in place and doing it

up tight.

(Note: To screw in the quick release (7), the threaded hole in the

main frame (16) and one of the holes in the saddle support (10)

must be aligned. Furthermore, ensure that the saddle support (10)

is not pulled out of the main frame beyond the marked maximum

adjustment position. The setting of the saddle support can be

adjusted as desired later.) For this, the quick release (7) must be

loosened by only a few revolutions (do not unscrew completely),

the top cap of the lock must be pulled away and the saddle

adjusted. To set the new position, release the top cap and move

the saddle support upwards and downwards until the rapid-action

lock engages. Then secure the new setting by tightening the quick

release.)

2. Place the saddle slide (12) into desired horizontally position at

saddle post (10) and screw it tightly onto the saddle support (6)

by using grip screw (21) and washer (20).

3. Push the saddle (13) with saddle bracket onto the saddle slide

(12) and tight it up in desired incline position with both nuts (nd

under the seat).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit XL 2000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit XL 2000 Manual

Product: