644110
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
English
Assembly Instructions
Remove all the separate parts from the packaging, lay them
on the floor and check roughly that all are there on the base of
the assembly steps. Please note that a number of parts have
been connected directly to the main frame and preassembled.
In addition, there are several other individual parts that have
been attached to separate units. This will make it easier and
quicker for you to assemble the equipment.
Step 1:
Install of front and rear foot (2+3) to the main frame (1).
1. Place two screws (9), washers (19), spring washers (26) and nuts
(18) accessibly beside the front and rear parts of the main frame
(1).
2. Insert the foot bars (2+3) in the holder of the main frame (1) and
adjust so that the hole patterns of the holders and the foot bars
(2+3) are aligned. The rear foot has preassembled eccentric caps
(10B).
3. Push one screw (9) through each hole.
4. Fit the screw ends of (9) with each one washer (19), spring washer
(26) and fasten with a nut (18).
(Note: If the machine has positioned for training on an uneven
floor, this can be compensated at any place by turning the
eccentric caps (10B).
Step 2:
Installation of handlebar (5) and drink bottle holder (22).
1. Place the handlebar (5) against the main frame (1) and adjust
so that the hole patterns in the handlebar and main frame are
aligned.
Put one washer (13) on each screw (12). Push the screws (12)
through the holes in the support, screw into the threaded holes
of the main frame (1) and tighten firmly.
2. Put the bottle holder (22) at the mainframe (1); fix it with two
screws (24) and washers (23) at appropriate position and insert
the bottle (25) into the bottle holder (22).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit X1 Bike - 1401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit X1 Bike - 1401 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info