585802

Christopeit WALKER de Luxe 9101 Manual

15
Zoom out
Zoom in
Previous page
1/32
Next page
15
Computer Instructions
The training computer supplied with this unit provides the maximum degree
of convenience in training. All the values related to training are displayed
in the window.
The time required, the number of steps per minute, the total number of steps
and the approximate calorie consumption are shown from the start of the
training session. All values start from zero and count upwards.
Switch the computer on by briefly pressing the ‚F‘ button.
If you wish to have one particular value displayed constantly during training,
just select it with the ‘F’ button. If you wish to have all the values displayed
permanently, by cycling through them one after another, just select the
“SCAN” function. The display cycles from the one function to the next at
intervals of approx. 6 seconds.
Simply begin your training to start the computer. The computer begins to
record and display all the values reached.
Simply end your training to stop the computer. The computer stops all
measurements and retains the last values that were measured. The com-
puter switches itself off after four minutes of inactivity. The most recently
reached values in functions TIME, STEP and CALORIES are saved and are
displayed again when training restarts. You can continue training on the
basis of these values.
If you wish to delete the most recently reached values, stop your training
session and hold down the ‘F’ button for around 5 seconds. The values for
all displays that can be modified are reset to zero.
1. “SCAN” display:
The values reached for the TIME, STEP/TOTAL, STEPS and CALORIES are
displayed one after another at intervals of approx. 6 seconds by selecting
this function.
2. ”ZEIT” (Time-display):
Time displays the time currently required in minutes and seconds. The values
most recently reached can be saved in this function, as described above.
(Max. display limit is 99.59 minutes)
3. ”SCHRITTE”(Step-display):
The Steps are displayed. The values most recently reached can be saved
in this function, as described above.
(Max. display limit is 199 Steps per minute)
4. ”SCHRITTE/TOTAL” (Steps total-display):
The total amount of all steps made from all absolved training units including
the actual training unit will be indicated.The values most recently reached
can be saved in this function, as described above.
(Max. display limit is 9999 Steps)
5. ”Kalorien” (Calories-display):
The approximate number of calories consumed up to that moment is dis-
played. The values most recently reached can be saved in this function, as
described above.(Max. display limit is 999.9 calories)
English
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit WALKER de Luxe 9101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit WALKER de Luxe 9101 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info