Manual Christopeit Vibro 2 (page 13 of 32) (English, German, Dutch, French)

803103

Zoom out

Zoom in

1/32

Assembly Instructions:

Remove all the separate parts from the packaging, lay them on the

ﬂoor and check that all are there on the basis of the instructions

for assembly and use.

1. Vibrationmachine

2. Remote control

3. 2x elastic ropes with carbine hooks

4. AC connection cable

Fold out the holder for elastic ropes located in front of Vibro 2 an

connect the elastic ropes with safety hooks. Ensure before each

training, that the elastic ropes are secure. Don’t bend the elastic

ropes more than 1,50m. During using the elastic ropes it is necessary

to ﬁx the Vibro 2 with body weight to keep ﬂoor contact.

Take the remote control out of the packaging and insert the batter-

ies (Type “AAA”-1.5 V pencells) on the back side into the battery

compartment by watching for the right polarity. (Batteries for the

remote control are not included in this item. Please buy them at

your located market.)

Mainconnection:

A) Mainswitch = Switches the machine On and Off

B) Fuse = Fuse (5x20mm) T5A/250Volt protects for overload

C) AC connector = Socket for AC cable

How To Operate

1. Plug in the AC connection cable into the AC socket of Vibro 2

and then insert to a suitable and save installed jack of wall power

(230V~50Hz). Press ON/OFF main switch to get ON position.

2. Press the „ „-key and the product will start with speed level 1

for 15 Minutes.

3. Press the Speed +key , the intensities will be higher, till to the

highest level 60 .

4. Press the Speed -key, the intensities will be lower, till to the

lowest level 1.

5. Press the „ „ -key again to ﬁnish the workout.

6. Turn off the main switch ON/OFF if the product is not in use.

When the product is not in use, it should be unplugged.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Vibro 2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit Vibro 2 Manual

Product: