There are 3 user-defined programs in the system, which allow the users to set their own settings according to their personal circumstances;
User-defined programs are: User1, User2, User3. Press the key continuously until User 1 is displayed in the title bar at the top of the interface;
The right side of the program name shows the preset time 10:00, press or key to change the required movement time;
Press the key to set parameters for the first time interval. The key can be used to set the speed, the key can be used to set the in-
cline. After finishing the setting of the first time, press key to enter the setting of the second time until completing the setting of the tenth time. Press
the key to set the running time; After all the Settings are completed, the data will be saved permanently until you reset it next time. This data will not
be lost due to power failure.
Heart rate Control Programs (HP1-HP2)
Heart rate control is to monitor the heart rate to control the operation of the treadmill, so as to achieve the best effect of exercise.
In standby mode, press the “ ” key continuously until the interface displays“HP1”,“HP2”;
Exercise time: set the exercise time and
adjust the range from 05:00 to 99:00
minutes
Age: set the age and adjust the range
from 15 to 80 years old
Target heart rate: set the target heart rate
and adjust the range 84-133 times/min
Maximum adjust-
ment speed:
Maximum speed of
heart rate program
is 3.0km/h-
maximum speed
of electronic meter
(default 10.0)
Press the key to enter the age setting. The default age is 30.Users can select the appropriate age by pressing or ;
After the user selects a good age, press the the system will automatically recommend a suitable target heartbeat to display in the interface according
to the user‘s choice of a good age, for the user to reference; Users can also select the desired target heartbeat value by pressing or
key according to their own situation. After the user selects the age and target heart rate, press the“ ” key to enter the setting of the maximum adjust-
ment speed, the range is 3.0km/h- the maximum speed of the electronic table; press the or key to choice the maximum speed you want;
After the user selects the maximum speed, press the“ ”key to enter the TIME setting. The “TIME” displays the preset TIME at 10:00, and press
the or key to adjust the running TIME. After setting the three parameters, press the key to start the treadmill;
Under the running state of HRC program, when the user presses the or key to adjust the speed and incline, the system will auto matically
adjust the speed and incline so that the user‘s heartbeat is close to the target heartbeat value.
The first minute is the warm up state, the system will not automatically adjust the speed and incline, and can only manually adjust. After 1 minute, every
10 seconds the system will according to your current heart rate value 0.5 km/h to automatically to each frequency acceleration. When „the heart rate
speed velocity“ to set the highest speed, if this time is not close to the target heart rate value, the frequency of the system will automati cally to 1 period/
time to increase the incline, and improve exercise way users heart beating heart get close to the target value; until the heartbeat reaches the target heart-
beat value, the incline and speed will remain unchanged in the current state. If the heart rate exceeds the target heart rate, the system will automatically
reduce the slope at a frequency of 1 segment/time every 10 seconds. If the slope is 0, the system will automatically reduce the speed at a frequency of
0.5km/h each time until the running speed is the lowest speed of the machine. If there is no heart rate more than 30 seconds and the slope value is not 0,
the slope will automatically reduce the frequency by 1 segment at a time, the speed by 0.5km/h at a time, the frequency by 1 time every 10 seconds, and
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Christopeit TM 5000S at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Christopeit TM 5000S in the language / languages: English, German as an attachment in your email.
The manual is 4.58 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
