Manual Christopeit TM 2 Pro 12411 (page 21 of 56) (English, German, Dutch, French)

585800

Zoom out

Zoom in

1/56

English

USER MANUAL OF COMPUTER

Function of Displays:

Pulse-Display:

Shows actually heart rate data.

Speed-Display:

Shows actually speed in km/h.

Distance-Display:

Shows actually distance in KM.

Time-Display:

Shows actually time of exercising in minutes and seconds.

Calories-Display:

Shows actually calories in kcal.

Program-No. Display:

Shows actually exercise programs P1~P25.

Program-proﬁle Display:

Shows the exercise proﬁle of exercise programs P1~P25.

Function of keys:

F-key:

PROGRAM key: On the stop status, press F-key to select exer-

cising speed programs -P1-P25-

E/L-key:

Select key of time-program, distance program or calories pro-

gram. Pressing this key after program stop deletes all settings.

Start/Stop: Press Start/Stop-key to start exercise program (motor

starts running) and press Start/Stop-key during exercising stops

program (running motor will slow stop).

“+”-key:

Press speed up key increase settings or motor speed.

“-”-key:

Press speed down key decrease settings or motor speed.

Quick Speed- keys 2, 4, 6, 8, 10, 12, 14, 16km/h:

Press one of these keys and the speed changes direct into 2, 4, 6,

8, 10, 12, 14, and 16km/h

MANUAL MODE:

How to start manual mode:

Put in the AC plug in wall power 230V~50Hz and put on the power

switch (17).

Put safety clip (59) onto the computer and it will show normal ma-

nual mode.

Stand your feet on both side rails.

Put the safety key at you exercise cloth and press start/stop-key

to start with exercising. After a 5 sec. count down, the motor begin

to run slowly and you can step on the running belt and follow the

speed. Adjust the speed with “+” and “-“ -keys into desired speed.

If put off the safety clip from computer at any time, the motor stop

slowly and the display will show E0. After put on the safety key on

computer the normal manually program will show.

Press “+” or “-“ -key to adjust value of speed.

Press quick speed -key to adjust speed quickly.

All values of the displays will counter up.

Setting Programs Time-Distance-Calories:

Time Program:

On the normal manual mode, press E/L-key, to enter time program

The time display will ﬂash and the initial value is 20:00. Press “+”-

key or “-“-key to set value. The range is: 8:00-99:00. If set a value

the display counts up till zero and then stops running motor.

Distance-Program:

On the normal manual mode, press E/L-key, to enter distance pro-

gram The distance display will ﬂash and the initial value is 5,00KM.

Press “+”-key or “-“-key to set value. The range is: 1,00-99:00KM.

If set a value the display counts up till zero and then stops running

motor.

Calories-Program:

On the normal manual mode, press E/L-key, to enter calories pro-

gram. The calories display will ﬂash and the initial value is 500kcal.

Press “+”-key or “-“-key to set value. The range is: 10-990kcal. If

set a value the display counts up till zero and then stops running

motor.

RANGE OF ALL FUNCTIONS:

INITAL INITIAL SETTING DISPLAY

VALUE RANGE RANGE

TIME(MIN:SEC) 0:00 20:00 8:00-99:00 0:00-99:59

SPEED(KM/H) 0.0 N/A N/A 1.0-16.0

DISTANCE(KM) 0.00 5.00 1.00-99.00 0.00-99.99

PULSE(BPM) P N/A N/A 40-199

CALORIES(KCAL) 0 500 10-990 0-999

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit TM 2 Pro 12411 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit TM 2 Pro 12411 Manual

Product: