Manual Christopeit T200 - 1750 (page 12 of 32) (English, German, Dutch, French)

656851

Zoom out

Zoom in

1/32

Step 5:

Assembly of surroundings of jump mesh (12).

1. Fold out the surrounding from jump mesh (12) and pull the short small

elastic ropes (10) from the corners from outside over the frame feet to

cover the frame completely.

Step 6:

Assembly of hand grip (3).

1. Put the enlarge tube (5) with connection tube (4) together, so that the

holes and threats are align. Put on every screw M8x15 (14), one spring

washer (16) and one washer (15) and screw both parts ﬁrmly. Place the

screw cover (20) over the screw connection point.

2. Put the hand grip (3) onto the enlarge tube (5), so that the holes and

threats are align. Put on every screw M8x15 (14), one spring washer

(16) and one washer (15) and screw both parts ﬁrmly. Place the screw

cover (20) over the screw connection point.

3. Insert the hand grip (3) with connection tube (4) into the provided holder

of the frame (1) and secure at the desired position by screwing in the

rapid-action lock (13).

(Note: To screw in the rapid-action lock (13), the threaded hole in the

hand grip holder (1) and one of the holes in the connection tube (4) must

be aligned. The setting of the hand grip (3) can be adjusted as desired

later. For this, the rapid action catch (13) must be loosened by only a

few revolutions, the cap of the lock must be pulled away and the hand

grip (3) adjusted. Then secure the new setting by tightening the rapid

action catch (13).

Step 4:

Assembly of further elastic ropes (11).

1. If the elastic ropes No. 1+2 are fully assembled you can install the next

two elastic ropes (11) in the same way parallel on side (C+D) as step 3

describes. If the assembly get more and more complete it is necessary

to pull more powerful the elastic rope to get right position. After elastic

ropes No. 3+4 are assembled, do it same way with elastic ropes No.

5+6 on side (E+F).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit T200 - 1750 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit T200 - 1750 Manual

Product: