517236
22
Zoom out
Zoom in
Previous page
1/52
Next page
22
Step 4:
Installation of pulley holder (8) and pulley bracket (50).
1. Place the pulley holder (8) in appropriate position at centre support (3)
and screw these parts together by using screw M10x65 (16), curved
washers 10//22 (17) and self locking nut M10 (18).
2. Put the pulley bracket (50) into the pulley holder (8) and screw them to-
gether by using screw M12x85 (52), washer 12//24 (53) and self locking
nut M12 (54). Attention, the cable pulley holder 1 (8) should turn easy
when it is assembled. Then put a screw cap (51) onto all screw head (52)
and nuts (54).
3. Insert a pulley (23) into each pulley bracket (50). Put a washer (20), a
plastic ring (75) and a cable slide (22) onto the screw M10x60 (21). Then
put the screw (21) through the pulley holder with pulley (23) and put a
plastic ring (75) and a cable slide (22) onto the screw (21) again. Tighten
it with washer (20) and nut (18) so that the pulley (23) can move easy.
Then put a screw cap (19) onto all screw heads (16+21) and nuts (18).
Step 5:
Installation of butterfl y arm holder (9) and butter fl y arms (10L+10R).
1. Place the butterfl y arm holder (9) in appropriate position at top cross
beam (6), and tighten it fi rmly by using screw M8x20 (87), screw M10x60
(24), washers (17+64), bracket (88) and nut (18+49).
2. Slide the foams (58) with help of a little bit soap water onto the butterfl y
arms (10L+10R).
3. Place the butterfl y arms (10L+10R) in right position into the appropriate
holder of butterfl y holder (9) and screw them together by using screw
M12x85 (52), washer 12//24 (53) and self locking nut M12 (54). Then put
a screw cap (51) onto all screw head (52) and nuts (54).
4. Place the hand grips (62) into appropriate holder of butterfl y arm left and
right (10L+10R) and screw them tightly by using screw M10x60 (21),
washer 10//22 (17) and nuts M10 (18). Then put a screw cap (19) onto
all screw heads (21+87) and nuts (18).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit SP 10 - 99861 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit SP 10 - 99861 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Christopeit SP 10 - 99861

Christopeit SP 10 - 99861 User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info