517235
24
Zoom out
Zoom in
Previous page
1/52
Next page
24
Step 7:
Installation of seat pad (57) and round tube (70) and seat support (13).
1. Adjust the seat pad (57) on seat support (13) so that the threaded holes
in the rear of seat pad (57) are align with the seat support (13) and screw
it tightly by using screw M10x70 (91) and washer 10//22 (17).
2. Slide the round tube (70) into the seat support (13) in middle position
and slide two foams (67A) onto the ends of round tube (70).
3. Place the seat support (13) into appropriate holder of centre support (3)
and screw it tightly by using screw M10x70 (91), washer 10//22 (17) and
nuts M10 (18). Then put a screw cap (19) onto all screw heads (16+91)
and nuts (18).
Step 8:
Installation leg curler (14) and short round tube (80).
1. Put the leg curler (14) with pre-assembled steel bearings 1 (26) into the
appropriate holder of seat support (13) and screw it tightly by using screw
M12x85 (52) and self locking nut M12 (124). Attention, the leg curler (14)
should move easy when it is assembled. Then put a screw cap (51) onto
all screw head (52) and nuts (54).
2. Slide the short round tube (80) into the holder of leg curler (14) in middle
position and slide two foams (67) onto the ends of short round tube
(80).
3. Put the pulley unit (89A) together as fi gure shows. That means: Insert
a pulley (23A) into the pulley holder of leg curler (14). Put a washer (20)
onto the screw M10x50 (90), put the screw (90) through the pulley holder
with pulley (23A) and place a plastic ring (75) and a cable slide (22) onto
screw end. Tighten it with washer (20) and nut (18) so that the pulley
(23A) can move easy. Then put a screw cap (19) onto all screw heads
(90) and nuts (18).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit SP 10 - 9986 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit SP 10 - 9986 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Christopeit SP 10 - 9986

Christopeit SP 10 - 9986 User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info