517235
19
Zoom out
Zoom in
Previous page
1/52
Next page
19
English
Instructions for assembly
Before you start assembly, it is essential that you follow our recom-
mendations
and safety instructions. Take out all parts out of the carton and place
them separately on the fl oor. Some parts are pre-assembled.
Step 1:
Installation of centre support (3) and rear stabilizer (2) at main base
(1).
1. Place the main base (1) and rear stabilizer (2) together on an even fl oor
and screw it tightly by using bolts M10x65 (16), curved washers 10//22
(17) and self locking nut M10 (18).
2. Put the centre support (3) onto the main base (1) and screw them tightly
by using carriage bolts M10x60 (24), bolt M10x70 (91), washers 10//20
(20), curved washer 10//22 (17) and self locking nuts M10 (18).
3. Put the stabilizer (82) onto the appropriate position of centre support (3)
and screw it tightly by using bolts M10x70 (91), washers 10//22 (17) and
self locking nuts M10 (18).
4. Place the back pad (34) with back side against the centre support (3) and
screw it tightly by using screws M10x65 (16) and washers 10//22 (17).
5. Put the pulley unit (31A) together as fi gure shows. That means: Put on
each screw (76) a washer 10//20 (20), a plastic ring (75), a cable slide
(22), a pulley (23) and again a plastic ring (75) and a cable slide (22) and
put the screw (76) through the centre support (3). Tighten the screw (76)
with washer (17) and nut (18), so that the pulley (23) can move easy.
6. Insert a pulley (23) into the pulley holder of main base (1). Put a washer
(20), a plastic ring (75) and a cable slide (22) onto the screw M10x60 (21),
put the screw (21) through the pulley holder with pulley (23) and tighten it
with washer (20) and nut (18) so that the pulley (23) can move easy. Then
put a screw cap (19) onto all screw heads (16+21+91) and nuts (18).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit SP 10 - 9986 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit SP 10 - 9986 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Christopeit SP 10 - 9986

Christopeit SP 10 - 9986 User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info