517232

Christopeit R 20 - 99171 Manual

17
Zoom out
Zoom in
Previous page
1/60
Next page
17
English
Assembly Instructions
Remove all the separate parts from the packaging, lay them on the
fl oor and check that all are there on the basis of the step drawings in
these instructions for assembly and use. Please note that a number
of parts have been connected directly to the main frame and preas-
sembled. In addition, there are several other individual parts that have
been attached to separate units. This will make it easier and quicker
for you to assemble the equipment.
Step 1:
Attach the front stabilizer (8) at front frame (20).
1. Attach the front foot (8) with the preassembled transport rollers (9) into
the holder of front frame (20) by using screws (7), washers (11), spring
washers (12) and cap nuts (10).
2. Screw in the buffer (18) into appropriate position at front frame (20) to
level the item into a stabile stand.
Step 2:
Installation of the right and left pedal (30R+30L) at pedal arms
(23R+23L).
1. Screw the right pedal (30R) into the threaded hole on the right hand side
of the pedal arm (23R) and tighten fi rmly.
(Note: Right and left are specifi ed as viewed seated on the machine during
training. It must also be observed that the threaded part of the right pedal
must be screwed clockwise into the threaded hole of the pedal crank.)
2. Screw the left pedal (30L) into the threaded hole on the left hand side of
the pedal arm (23L) and tighten fi rmly.
(Note: The threaded part of the left pedal must be screwed anticlockwise
into the threaded hole of the pedal crank.) The pedals are marked “R” for
right and “L” for left.
3.Then attach the pedal straps left and right to the respective pedals.
Step 3:
Attach the rear stabilizer (13) at rear frame (72).
1. Attach the rear foot (13) with the preassembled end caps (14) into the
holder of rear frame (72) by using screws (7), washers (11), spring washers
(12) and cap nuts (10). After assembly has been completed, you can com-
pensate for minor irregularities in the fl oor by turning end cap (69). The
equipment should be set up that the equipment does not move of its own
accord during a training session.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit R 20 - 99171 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit R 20 - 99171 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info