585805
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
Assembly Instructions
Before beginning assembly, be sure to observe our recommendations
and safety instructions. Some parts are preassembled.
Step 1:
Main frame assembly
1. Slide the Rubber Feet (5) onto the side frames (3+4). Lay the side frames
(3+4) and the Reinforcing tube (36) on the fl oor. Insert the Side Frames
(3+4) onto the Seat Rail (1), using 4 pcs of Bolts, 4 pcs of Washers (8),
and 4 pcs of Capnuts (7) to tighten it.
2. Put the End Caps (29) onto the end of the Side Frames (3+4).
3. Attach the Seat (9) onto the Seat Support (2). Secure with
4 pcs of Screws (10).
4. Remove the Bottom Rollers (12) and slide the Seat Support
(2) onto the Seat Rail (1). Insert the Long Bolt (14), Washers
(8) through the hole on Seat Support (2) and 2 pcs of Rollers
(12), tighten with Washers (8) and Nylon Nut (15).
Step 3:
Handle bars assembly
1. Take the left-hand rowing handlebar (24) which is market l. First slide
on a resistance adjustment bracket (30) and than one of the bellows
(27). Attach the handlebar to the U-bracket on the left-hand side of
the frame (3) ensuring the handlebar grip points inwards. Repeat with
the right-hand rowing handlebar.
2. Attach the Rowing Handles Bars (24+25) to the „U“ brackets at the
Left/Right Side Frames (3+4), using Bolts (23), Washers (8) and Nylon
Nuts (15).
Step 2:
Foot rests and computer assembly
1. Take the computer (21) that has been supplied out of the packaging and
insert the batteries (Type “AA”-1.5 V pencells) by watching for the right
polarity on the back of the computer (21). (Batteries for the computer
are not included in this item. Please buy them at your located market.)
2. Insert the Foot Rest Shaft (16) through the holes on the Foot Rests
(18) and Spacer Sleeves (17) then through the hold of the Seat Rail (1).
Using the Large washers (19) and Nylon Nuts (20) to tighten it.
3. Connect the cable (38) and the Computer (21) to the bracket in front
of the Seat Rail (1). Locate the back of computer over the bracket on
the Seat Rail (1) and slide down to lock into position.
English
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit Oxford roei at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Oxford roei in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info