585789
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
Assembly Instructions
Before beginning assembly, be sure to observe our recommendations
and safety instructions.
Step 1:
Installation of front and rear foot (5+6) at main frame (1).
1. Place each 2 screws (9) beside the rear and front part of the main frame (1).
2. Put the longer rear foot (6) into the rear holder of the main frame (1) so that
the holes of the holder and rear foot are aligned. Screw tightly with screws (9).
3. Put the shorter front foot (5) into the front holder of the main frame (1 )
so that the holes of the holder and front foot are aligned. Screw tightly with
screws (9).
Step 2:
Installation of the right and left pedal (3R+3L) at pedal crank (2).
1. The pedals (3R+3L) are marked with „R“ for right side and „L“ for left side.
(Note: Right and left side are specified as viewed seated in front of the
machine during training.)
2. Screw the right pedal (3R) into the threaded hole on the right hand side
of pedal crank (2) and tighten firmly. (Note: It must be observed that the
threaded part of the right pedal (3R) must be screwed clockwise into the
threaded hole of pedal crank (2).)
3. Screw the left pedal (3L) into the threaded hole on the left hand side of the
pedal crank (2) and tighten firmly. (Note: The threaded part of the left pedal
(3L) must be screwed anticlockwise into the threaded hole of pedal crank (2).)
Start the computer (4).
Start exercising or push F-key at computer and the display of computer
show data. If not, take out the computer (4) from housing, insert one button
cell of the type AG13 or LR44 into battery compartment of the back side of
computer. Observe the right polarity and put the computer back into housing.
(If the batteries for the computer are not included in this item, please buy
them at your located market.)
Step 3:
Checks:
1. Check the correct installation and function of all screwed and plug con-
nections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the machine at a low
resistance. Setting and make your individual adjustments.
Note: Please keep the tool set and the instructions in a safe place as these
may be required for repairs or spare parts orders becoming necessary later.
GB
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit Mini Bike MB 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Mini Bike MB 3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info