656854
15
Zoom out
Zoom in
Previous page
1/44
Next page
15
English
Step 5:
1. To storage the item, screw out the hand grip screw (2) totally
and turn/pull the quick release (15) to unlock the seat rail (22).
Fold up the seat rail (22) into vertically position and secure this
position with turn/pull the quick release (15) at bottom side of
main frame (1).
2. The rear foot (29) can fold up too, by removing the hand grip
screw (2).
Step 6:
Checks
1. Check the correct installation and function of all screwed
and plug connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the
machine at a low resistance setting and make your indivi-
dual adjustments.
Note:
Please keep the tool set and the instructions in a safe
place as these may be required for repairs or spare
parts orders becoming necessary later.
Step 4:
Attach the seat rail (22) and pedals (11) at main frame (1).
1. Place the seat rail (22) against the main frame (1) and connect
the sensor cable (36) with connection cable (46).
2. Place the seat rail (22) into the holder of main frame (1), so that
the holes pattern and screw the seat rail (22) at main frame (1)
by using screw M10x100 (14), washer (8) and nut (9).
(Don’t tighten too much, the seat rail (22) should be fold up
easily.)
3. Secure the seat frame (22) during training by screw in the hand
grip screw (2) with washer (35).
4. Put a washer (10) and a pedal (11) on screw M12x155 (12) and
tighten the pedals (11) at main frame (1) into appropriate posi-
tion.
5. Take the computer (6) that has been preassembled at main co-
ver and insert the batteries (Type “AA”-1.5 V pencells) by wat-
ching for the right polarity on the back of the computer (6).
(Batteries for the computer are not included in this item. Please
buy them at your located market.) At the bottom of the compu-
ter is in the middle an arrest which the computer can be unlo-
cked and removed from the case.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit Lugano - 1560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Lugano - 1560 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info