Manual Christopeit ET 6 - 9107 (page 20 of 64) (English, German, Dutch, French)

517225

Zoom out

Zoom in

1/64

Step 5:

Attach the pedal

1. Attach the pedal straps to the pedals (33R/33L).

NOTE: The end with four adjustable holes must be set outwards.

2. The pedals (33R/33L) are marked with „R“ & „L“

NOTE: Right and Left are speciﬁed as viewed seated on the machine

during training.

Connect each pedal (33R/33L) to the matching crank arm (34+88)

(NOTE: The right pedal „R“ should be threaded on clockwise. The

left pedal „L“ should be threaded on counter-clockwise.)

Step 6:

Attach the power

1. Please insert the plug of adaptor (35) to the jack (50) of chain guard.

2. Please insert the adaptor (35) to the jack of wall power (230 V/50Hz)

Step 7:

Checks

1. Check the correct installation and function of all screwed and plug

connections.

Installation is thereby complete.

2. When everything is in order, familiarize yourself with the machine at a

low resistance

Setting and make your individual adjustments.

Note:

Please keep the tool set and the instructions in a safe place as these

may be required for repairs or spare parts orders becoming necessary

later.

Step 4:

Attach the handlebar and computer

1. Put the plug of middle section motor cable (14) into the socket from

monitor (22) backside.

2. Attach the monitor (22) to top monitor bracket of front post (13) with

screws (23). (Attention: Ensure that the cable loom are not crunched

or pinched during installation.)

3. Attach the handlebar (27) with hand pulses (26) to welded clamp of front

post (13) and secure with clamp, clamp decoration cover (28) and star

grip screw (32) in your desired position. Fix the decoration cap (28) with

screw (30).

4. Insert the plug of hand pulse wire (24) to the jack of the monitor (22).

Attach the handlebar covers (28 + 29) with screws (30 + 31).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit ET 6 - 9107 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit ET 6 - 9107 Manual

Product: