793191

Christopeit ET 2000 Manual

23
Zoom out
Zoom in
Previous page
1/64
Next page
23
TIME/ WATT :
Indicates Time or Watt alternately. The time shows minutes and seconds.
If preset, time counts downwards. Minimum preset 5Min. Range 5-99Min.
The actually power display show in Watt. Preset range 30-350Watt only in
Watt program P16.v Or permanently by pressing the F-key.
RPM/SPEED/KMH:
Indicates RPM or Speed alternately. The RPM display shows the cycle
turnings per minute. The speed display show kilometers per hour. Or
permanently by pressing the F-key.
DIST/CAL:
Indicates Distance or Calorie alternately.
The distance display show kilometer. Preset range 1-999km. If preset distance
counts downwards. The calories display shows kcal. Minimum preset 10kcal.
Preset range 10-990. Or permanently by pressing the F-key.
KM Total (ODO):
The distance in km of all training units is displayed. It is not possible to
specify or reset to zero.
PULSE :
Indicates the actually pulse heart rate. The whole set of heart rate detector
include 2 sensors each side. Each sensor has 2 pieces of metal parts. The
correct way to get detected is to gently hold both metal parts each hand.
With the good signals picked up by the computer, the heart mark in the
HEART RATE Display shall ash. Range 60-240bpm. If a pulse upper limit
is specied, the display ashes when the preset value is reached.
TARGET H.R.:
Indicates only one value of TARGET HEART RATE.
LOADING Proles:
There are 10 columns of loading bars, and 8 bars in each column. Each
column represents 1 minute workout (without the change of TIME value),
and each bar represents 3 levels of loading.
Program Graph:
Each graph shown is the prole of the loading in each interval (column). With
the value of TIME counting up, each interval is 3 minute that all the columns
make up 30 minutes. With the value of TIME counting down, each interval is
the value of setup TIME divided by 10. For example, if the time value is setup
to 40 minutes, each interval will be 40 minutes divided by 10 intervals
(40/10=4). Then, each interval will be 4 minutes. The following graphs are
all the proles in the monitor.
• Things You Should Know Before Exercising
The values calculated or measured by the computer are for exercise purpose
only, not for medical purpose.
Programs Selection:
There are 23 programs 1 Manual Program, 10 Preset Programs, 4 Heart
Rate Control Programs, 5 User Setting Programs, 1 Speed Independent
Watt-Program, 1 Pulse Recovery Measuring and 1 Body Fat program.
Computer Instructions
The monitor is designed for programmable magnetic bikes and introduced
with the following categories:
- Key Functions
- About Displays
- Operating Ranges
- Things You Should Know Before Exercising
- Operation Instructions
• Key Functions
There are total 5 keys including START/STOP, FUNCTION(F), UP(+),
DOWN(-), and RECOVERY (TEST).
START/STOP: Starts or stops the program chosen. And, resets the monitor
by pressing and holding for 2 seconds.
FUNCTION (F): Chooses or enters the functions from PROGRAMS, TIME,
DISTANCE, WATT, CAL, TARGET HEART RATE, AGE, and 10 columns.
The chosen function shall ash. Please note that not all the functions can be
selected in every program according to the types of each program. During
exercise, press the F-key to display the functions RPM and calories or speed
and distance permanently or alternately.
UP(+): Selects or increases the values of PROGRAMS, TIME, DISTANCE,
WATT, CAL., TARGET HEART RATE, AGE, and 10 columns.
DOWN(-): Selects or decreases the values of PROGRAMS, TIME,
DISTANCE, WATT, CAL., TARGET HEART RATE, AGE, and 10 columns.
RECOVERY(TEST): Starts the function of PULSE RECOVERY.
• About Display
PROGRAM:
Indicates the programs selected from PROGRAM 1 to PROGRAM 21
LEVEL:
Indicates the level of loading selected from LEVEL 1 to LEVEL 24.
Manual Program Programm 1 Rolling Program 2 Valley
Programm 3 Fatburn Programm 4 Ramp Programm 5 Mountain
English
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit ET 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit ET 2000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info