Manual Christopeit ET 2000 (page 19 of 64) (English, German, Dutch, French)

793191

Zoom out

Zoom in

1/64

Assembly Instructions

Remove all the separate parts from the packaging, lay them on the oor

and check roughly that all are there on the base of the assembly steps.

Please note that a number of parts are connected directly to the main

frame preassembled. In addition, there are several other individual parts

that have been attached to separate units. This will makes assembly

easier and quicker for you. Assembly time: 30 - 40 min.

Step 1:

Attach the stabilizer (2+3) at main frame (1).

1. Attach the front foot (2) with the preassembled transport rollers (10) to

the main frame (1). Do this with the two screws M8x75 (5), washers 8//25

(6), spring washers M8 (15) and cap nuts M8 (7).

2. Attach the rear foot (3) to the main frame (1). Do this with the two screws

(5), washers (6), spring washers (15) and cap nuts (7). After assembly

has been completed, you can compensate for minor irregularities in the

oor by turning the adjusting end cap (4). The equipment should be set

up that the equipment does not move of its own accord during a training

session.

Step 2:

Attach the pedals (9R+9L) at pedal crank (8).

1. Attach the pedal straps to the appropriate pedals (9R+9L).

NOTE: The end with many adjustable holes must be set outwards.

2. The pedals (9R+9L) are marked with „R“ & „L“

NOTE: Right and Left is specied as viewed seated on the machine

during training.

Connect each pedal (9R+9L) to the matching pedal crank (8R+8L)

(NOTE: The right pedal „R“ should be threaded on clockwise. The left

pedal „L“ should be threaded on counter-clockwise.)

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit ET 2000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit ET 2000 Manual

Product: