585807

Christopeit EMS 6 Manual

24
Zoom out
Zoom in
Previous page
1/60
Next page
24
More about Workout Parameters
QUICK-START-PROGRAM
After power-up, press PROGRAMM -key to enter “SCHNELLSTART” (Quick
Start) -Program. Start pedaling to begin workout at this time. Press “+” or
“–“ -key to adjust resistance load during workout.
MANUAL-PROGRAM
Setting Parameters for Manual
Selecting “MANUELL” (Manual) using PROGRAMM -key then pressing
“F”-key, 1St parameter “ZEIT” (Time) will flash so value can be adjusted
using“+” or “–“ -key.
Press “F”-key to save value & move to next parameter to be adjusted.
Continue through all desired parameters, start pedaling to start workout.
“+” or “–“ -key adjusts resistance load during workout.
USER-Program
User program allows user to create their own program that can be used
immediately and on subsequent workouts.
Create User Profile
Selecting user program with PROGRAMM -key, Press “F”-key to select
“INDIVIDUAL” (USER) mode. The text window will display” Select Profile”
4 seconds , meanwhile Segment 1 will flash. Adjust “+” or “–“-key to set
desired resistance load. Press “F”- key to move to next segment, continue
for all 10 segments.
Setting Parameters for User Program
After that 1st parameter “ZEIT” (Time) will flash so value can be adjusted
using “+” or “–“ - key. Press “F”-key to save value & move to next parameter
to be adjusted. Continue through all desired parameters, start pedaling to
begin workout. The resistance could not be adjusted by “+” or “–“ –key
during workout.
Note: The final 10 segments profile will be saved for future workouts.
INTERVAL-PROGRAM
Selecting ”INTERVALL” (Interval) pressing PROGRAMM -key then pressing
“F”- key. The text window will display “SELECT LEVEL” 3 seconds.
There are 3 levels (L1, L2, L3) to select, using “+” or “–“ -key then pressing
“F”- key to confirm.
Setting Parameters for Interval
After that 1st parameter “Time” will flash so value can be adjusted using
“+” or “–“ -key. Press “F”-key to save value & move to next parameter to be
adjusted. Continue through all desired parameters, start pedaling to start
workout. The resistance could not be adjusted by “+” or “–“ -key during
workout.
WATT-PROGRAM
Selecting “WATT” pressing PROGRAMM –key, then pressing “F”-key.
The text window will display “SELECT WATT” 3 seconds. Meanwhile “100”
will flash. Selecting WATT value from 100W to use “+” or “–“ -key then
pressing “F”-key to confirm.
Setting Parameters for WATT
After that 1st parameter “Time” will flash so value can be adjusted using
“+” or “–“ -key. Press “F”-key to save value & move to next parameter to be
adjusted. Continue through all desired parameters. Start Pedaling to start
Workout, “+” or “–“ -key adjusts WATT value during workout.
HRC-PROGRAM
Setting Parameters for Heart Rate Control
Selecting “ZIELPULS” (HRC) pressing PROGRAMM –key, then pressing
“F”-key. 1St parameter “ZEIT” (Time) will flash so value can be adjusted
using “+” or “–“ -key. Press “F”- key to save value & move to next parameter
to be adjusted. Continue through all desired parameters, start pedaling to
start workout.
If pulse is above or below the set target pulse, computer adjust the
resistance load automatically.
It will check every 10 seconds approx. 1 level will increase or decrease
(Note: each bar represents 2 level of loading)
User can not adjust resistance load, using “+” or “–“ -key during the
workout.
TEST-PROGRAM
Selecting “TEST ” pressing PROGRAMM -key then pressing “F”-key.
The display will show out average speed, total Distance, total Kilojoules and
average Pulse of last workout for 4 seconds. After that the text window will
display “SELECT WATT” 3 seconds, meanwhile “100” will flash.
Selecting WATT value from 100W, using “+” or “– “ -key then pressing
“F”-key to confirm. Start Pedaling to start Workout, Time display will show
12:00, it can not be changed.
After 12 minutes, will display Average Speed, Total Distance, Total Kilojoules
and Average Pulse,
BMI-BMR-FAT-PROGRAM
Setting Data for BMI BMR FAT
Selecting “BMI BMR FETT” pressing PROGRAMM -key then pressing
“F”-key.
The text window will display “SLECT AGE” 3 seconds, meanwhile “30” will
flash so Age can be adjusted using
“+” or “–“ -key, press “F”-key to save value & move to next data.
The text window will display ‘SELECT GENDER” 3 seconds, meanwhile “♀”
of Gender will flash so Gender can be adjusted using “+” or “–“ -key,
press “F”-key to save gender & move to next data.
The text window will display “SELECT WEIGHT” 3 seconds, meanwhile “
70” of Weight will flash so weight can be adjusted to use “+” or “–“ -key,
press “F”-key to save value & move to next data.
The text window will display “SELECT HEIGHT” 3 seconds, meanwhile “
175 “of Height will flash so Height can be adjusted to use “+” or “–“ -key,
press “F”-key to save value
Press “F”- key to start measurement, please also grip hand pulse grips.
After measurement the display will show out Body Fat %, BMI and BMR.
(Body Fat % and BMI will switch display to another in every 4 seconds)
1. BMI (Body Mass Index): BMI is a measure of body fat based on height
and weight that applies to both adult men and women.
2. BMR (Basal Metabolic Rate): Your Basal Metabolic Rate (BMR) shows the
number of calories (1 Calorie = 4,186 Joule) your body needs to operate. This
doesn’t account for any activity, it’s simply the energy needed to sustain a
heartbeat, breathing and normal body temperature. It measures the body
at rest, not sleep, at room temperature.
MOUNTAIN-PROGRAM
Selecting “BERG” (Mountain) pressing PROGRAMM –key then pressing
“F”-key. The text window will display “SELECT LEVEL” 3 seconds.
There are 3 levels (L1, L2, L3) to select, using “+” or “–“ -key then pressing
“F”-key to confirm.
Setting Parameters for Mountain
After that 1st parameter “ZEIT” (Time) will flash so value can be adjusted
using “+” or “–“ -key. Press “F”-key to save value & move to next parameter
to be adjusted. Continue through all desired parameters, start pedaling to
begin workout. The resistance could not be adjusted by “+” or “– “ -key
during workout.
50~350 50/80
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit EMS 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EMS 6 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info