Manual Christopeit EMS 6 (page 19 of 60) (English, German, Dutch, French)

585807

Zoom out

Zoom in

1/60

English

Assembly Instructions

Before beginning assembly, be sure to observe our recommendations

and safety instruction. Remove all the part of your cycle from the carton

and place them on the ﬂoor carefully. Some parts are pre-assembled.

Assembly time: 30 - 40 min.

Step 1:

Attach the front and rear stabilizer (2+3) at mainframe (1).

1. Attach the rear stabilizer (3) assembled with 2 rear caps (12) and

adjustable feet (20) to main frame (1), using 2 Allen head bolts (17), 2

washers (19) and 2 spring washers (18). You can use adjustable feet

(20) to level the bike at uneven ﬂoor.

2. Attach the front stabilizer (2) assembled with 2 front caps with trans-

portation roller (11) to main frame (1), using 2 carriages bolts (13), 2

washers (14), 2 spring washers (15) and two cap nuts (16).

Step 2:

Attach the pedals (9R+9L) at pedal crank (10L+10R).

1. Attach the pedal straps to the appropriate pedals (9R+9L).

NOTE: The end with many adjustable holes must be set outwards.

2. The pedals (9R+9L) are marked with „R“ & „L“

NOTE: Right and Left is speciﬁed as viewed seated on the machine

during training.

Connect each pedal (9R+9L) to the matching pedal crank (10R+10L)

(NOTE: The right pedal „R“ should be threaded on clockwise. The left

pedal „L“ should be threaded on counter-clockwise.)

Step 3:

Attach the seat (7) and seat post (6).

1. Slide the plastic collar (34) to cover the seat post (6).

2. Insert the seat post (6) to seat post mounting tube of mainframe (1)

and secure in position with the seat post quick release (32).

3. Put the clamp of seat (7) to the seat slide (38) and tighten the seat ﬁrmly

into your desired position.

4. After place the seat slide (38) with seat (7) onto the seat post (6) ﬁx

it with washer (14) star grip nut (35), you can move the seat slide to

adjust your desired position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EMS 6 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit EMS 6 Manual

Product: