585806
20
Zoom out
Zoom in
Previous page
1/56
Next page
20
Power Up
When turned on, the display with emit 3 beep sounds as all LCD displays
light up.
Note: When there is no signal or data input for 4 minutes, the machine will
enter sleep mode. Pedaling the machine or key selection will wake-up the
computer.
Break
Workout can be break by pressing “L”- key. Workout will continue when
“L”- key is pressed again.
Workout Selection
After power-up using PROGRAMM keys to select desired mode. Then the
text window will display the desired program by scrolling 3 seconds.
There are 9 basic workout modes:
Quick Start (SCHNELLSTART), Manual- (MANUELL), User- (INDIVIDU-
AL), Interval- (INTERVALL), Watt (WATT), HRC (ZIELPULS), Test- (TEST),
Bmi-Bmr-Fat- (BMI-BMR-FETT), Mountain- (BERG) Program.
After that the text window will display „TRETEN BEGINNEN“ or „MODUS
DRÜCKEN“ press “F”- key to set data by scrolling, it will be varied depend
on different programs.
Key Functions
“F” - (MODE) To input desired value or workout mode. May ad-
vance flashing prompt to next parameter or mode for selection.
“L” – (RESET) Break & Resume workouts.
Back up to the previous prompt during data entry.
Operates only when in pause mode. Holding key for 3 seconds will reset
computer to power-up condition.
“–” – (DOWN) Decrease value of selected workout parameter:
TIME, DISTANCE, etc.
During the workout, it will decrease the resistance load.
“+” – (UP) Increases value of selected workout parameter.
During the workout, it will increase the resistance load.
Computer manual
PROGRAMM – (PROGRAM)
Selection of workout mode: Quick Start, Manual, User Program, Interval
Program, Watt Program, HRC Program, Test Program, BMI-BMR-FATT
Program, Mountain Program.
Test – (RECOVERY)
After workout or during workout press Test -key and Recovery Measu-
rement will start.
Recovery is Fitness Level 1-6 after 1 minute.
Setting Workout Parameters
After selecting desired workout mode: Quick Start, Manual, User Pro-
gram, Interval Program, Watt Program, HRC Program, Test Program,
BMI-BMR-FATT Program, Mountain Program
may pre-set several workout parameters for desired results.
WORKOUT PARAMETERS:
TIME/ DISTANCE / WATTS /KILOJOULE /PULSE
Note: Some parameters are not adjustable in certain programs.
Once a program has been selected, pressing “F”- key,
The text window will display “Select Time” 3 seconds then display “PRESS
MODE TO ACCEPT” (MODUS DRÜCKEN). At the same time “0:00“of time
parameter will flash.
Using “+” or “–“ - key you may select desired time value. Press “F”- key
to input value.
Flashing prompt will move to the next parameter. Continue use of Continue
use of “+” or “–“ - key to select desired value then press “F”- key to input
value.
After finished of setting workout parameters, the text window will display
“TRETEN BEGINNEN” (Start pedaling) by scrolling. User can start the
workout by starting pedaling.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit EMS 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EMS 3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info