517219
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
English
Step 4:
Attach the computer (1) at handlebar support (7).
1. Push the plug of the connecting cable (6) projecting from the handlebar
support (7) into the associated socket of the computer (1).
2. Place the computer on the plate provided for it on the handlebar support
(7) and attach it with the screws (28).
3. Push the plug of the pulse cable (5) projecting from the handlebar (4)
into the associated socket of the computer (1).
Step 5:
Installation of saddle (17) at saddle support (21) by using saddle slide
(19). Installation of saddle support (21) at mainframe by using rapid
action lock (44).
1. Push the saddle (17) with saddle bracket into the movable saddle slide
(19) and tight it up in desired position.
2. Place the movable seat post (19) into the holder of saddle post (21), set
it at the desired horizontally position and tighten it by washer (22) and
movable seat knob (23).
3. Insert the saddle support (12) into the provided holder of the main frame
(27) and secure at the desired position by screwing in the rapid-action
lock (44).
(Note: To screw in the rapid-action lock (44), the threaded hole in the
main frame (27) and one of the holes in the saddle support (21) must be
aligned. Furthermore, ensure that the saddle support (21) is not pulled
out of the main frame beyond the marked maximum Position. The setting
of the saddle post can be adjusted as desired later. For this, the rapid
action catch (44) must be loosened by only a few revolutions, the cap
of the lock must be pulled away and the saddle adjusted. Then secure
the new setting by tightening the rapid action catch.
Step 6:
Installation of the right pedal (68R) and the left pedal (68L) on the
pedal arms (69R+69L).
1. The pedals are marked „R“ for right and „L“ for left.
2. Screw the right pedal (68R) into the threaded hole on the right hand side
of the pedal arm (69R) and tighten firmly.
(Note: Right and left are specified as viewed seated on the machine
during training. It must also be observed that the threaded part of the
right pedal must be screwed clockwise into the threaded hole of the
pedal crank.)
3. Screw the left pedal (68L) into the threaded hole on the left hand side
of the pedal arm (68L) and tighten firmly.
(Note: The threaded part of the left pedal must be screwed anticlockwise
into the threaded hole of the pedal crank.)
4. Then attach the pedal straps left and right to the respective pedals.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit EM 3 - 9808 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EM 3 - 9808 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info