Manual Christopeit EL 8 - 9824 (page 23 of 60) (English, German, Dutch, French)

517218

Zoom out

Zoom in

1/60

English

E. Body Types:

There are 9 body types divided according to the FAT% calculated. Type

1 is from 5% to 9%. Type 2 is from 10% to 14%. Type 3 is from 15% to

19%. Type 4 is from 20% to 24%. Type 5 is from 25% to 29%. Type 6 is

from 30% to 34%. Type 7 is from 35% to 39%. Type 8 is from 40% to

44%. Type 9 is from 45% to 50%.

F. BMR: Basal Metabolism Ratio

G. BMI: Body Mass Index = Bodyweight : bodyheight²

Operation Instructions

A. Exercising with a Specific Goal:

1. TIME Control: Sets up a period of time to exercise. (Except in Pro-

gram 8)

2. DISTANCE Control: Sets up a certain distance to exercise. (Except in

Program 8)

3. BODY FAT Control: Computer designs various programs for different

people with different body fat ratio.

4. WATT Control: Keeps different bodies burning in desire WATT

consumed.

5. Heart Rate Control: Keeps users to exercise under a safe heart-

beating condition

B. Pulse Rate:

The whole set of heart rate detector include 2 sensors each side. Each

sensor has 2 pieces of metal parts. The correct way to get detected is

to gently hold both metal parts each hand. With the good signals picked

up by the computer, the heart mark in the HEART RATE/BODY TYPE

Display shall flash. (You can also use a pulse belt which is not codified

and has got a frequency of 5.0 – 5,5 KHz)

C. Manual Program:

PROGRAM 1 is a manual program. Press „ENTER“ key to select TIME,

DISTANCE, and AGE. Then, press „+“ or „-“ key to adjust the values.

The default level of loading is 6. After pressing „S“ key to exercise,

please also apply the heart rate detector appropriately. Users may

exercise in any desire level (by pressing „+“ or „-“ during the workout)

with a period of time or a certain distance. With the input of age, the

computer may suggest a target heart rate to exercise. The suggested

heart rate is 85%(220 – age). So, if the heart rate detected equals to or

greater than the TARGET H.R., the value of HEART RATE will keep

flashing.

Please note that it is a warning for users to slow down or to lower

the level of loading.

D. Preset Programs:

PROGRAM 2 to PROGRAM 7 are the preset programs. Press „E“ key to

select TIME, DISTANCE, and AGE. Then, press „+“ or „-“ key to adjust

the values. Users may exercise with different level of loading in different

intervals as the profiles show. After pressing „START/STOP“ key to

exercise, please also apply the heart rate detector appropriately. Users

may also exercise in any desire level (by pressing „+“ or „-“ during the

workout) with a period of time or a certain distance. With the input of age,

the computer may suggest a target heart rate to exercise. The suggested

heart rate is 85%(220 – age). So, if the heart rate detected equals to or

greater than the TARGET H.R., the value of HEART RATE will keep

flashing.

Please note that it is a warning for users to speed down or to lower

the level of loading.

E. Speed Independent Program:

Program 8 is a Speed Independent Program. Press „E“ key to select the

values of TIME, DISTANCE, WATT, and AGE. Then, press „+“ or „-“ key

to adjust the values. After pressing „S“ key to exercise, please also

apply the heart rate detector appropriately. During the exercise, the

level of loading is not adjustable. In this program, computer will adjust

the level of loading according to the value of WATT setup. For example,

the level of loading may increase while the speed is too slow. Also, the

level of loading may decrease while the speed is too fast. As a result, the

calculated value of WATT will close to the value of WATT setup by users.

With the input of age, the computer may suggest a target heart rate to

exercise. The suggested heart rate is 85%(220 – age). So, if the heart

rate detected equals to or greater than the TARGET H.R., the value of

HEART RATE will keep flashing.

Please note that it is a warning for users to speed down or to lower

the level of loading.

F. Heart Rate Control Programs:

Program 9 to Program 12 are the Heart Rate Control Programs. In pro-

gram 9, press „E“ key to select TIME, DISTANCE, and TARGET H.R.

Users may setup a target heart rate to exercise in a period of time or a

certain distance. In Program 10 to Program 12, press „E“ key to select

TIME, DISTANCE, and AGE. Then, press „+“ or „-“ key to adjust the

values. Users may exercise in a period of time or a certain distance with

60% Max Heart Rate in Program10, 75% Max Heart Rate in Program 11,

and 85% Max Heart Rate in Program 12. After pressing „S“ key to

exercise, please also apply the heart rate detector appropriately. In

these programs, the computer will adjust the level of loading according

to the heart rate detected. For example, the level of loading may increase

while the heart rate detected is lower than TARGET H.R. Also, the level of

loading may decrease while the heart rate detected is higher than TAR-

GET H.R. As a result, the user’s heart rate will be adjusted to close the

TARGET H.R. in the range of TARGET H.R. –5 and TARGET H.R. +5.

G. Body Fat Program:

Program 13 is a special program designed to calculate users’ body fat

ratio and to design a specific loading profile for users. With 9 different

body types, the computer can generate 9 different profiles for each.

Press „E“ key to select GENDER, HEIGHT, WEIGHT, and AGE. Then,

press „+“ or „-“ key to adjust the values. After pressing „S“ key to

calculate body fat, please also apply the heart rate detector appropriately.

If the detector cannot pick up any signals, an error message „E3“ will

show up in the profile display. If it happens, press „S“ key to calculate

again. Then, the calculation values of FAT%, BMR, BMI, BODY TYPE,

and a designed profile will show up shortly. After the values and profile

show up, they will be stored in PROGRAM 14 (U1). And the next user

calculation will be stored in PROGRAM 15 (U2). Press „+“ or „-“ key to

select PROGRAM 14 or PROGRAM 15. Press „S“ key to exercise. The

profile shown in the display is specially designed for your body type.

H. User Setting Programs:

Program 14 to Program 15 are the user-setting programs that store the

calculated values from Program 13. Users are also free to edit the

values in the order of TIME, DISTANCE, AGE, and the level of loading in

10 intervals. The values and profiles will be stored in the memory after

setup. After pressing „S“ key to exercise, please also apply the heart

rate detector appropriately. Users may also change the ongoing loading

in each interval by pressing „+“ or „-“ key, and they will not change the

level of loading stored in the memory. With the input of age, the computer

may suggest a target heart rate to exercise. The suggested heart rate is

85% (220 – age). So, if the heart rate detected equals to or greater than

the TARGET H.R., the value of HEART RATE will keep flashing.

Please note that it is a warning for users to speed down or to lower

the level of loading.

I. Pulse Recovery:

It is a function to check the condition of pulse recovery that is scaled

from 1.0 to 6.0 while 1.0 means the best and 6.0 means the worst and the

increment is 0.1. In order to get rated correctly, users must test it right

after the workout finished by pressing „Test“ key and then stop

exercising. After the key is pressed, please also apply the heart rate

detector appropriately. The test will last for 1 minute and the result will

show in the display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EL 8 - 9824 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit EL 8 - 9824 Manual

Product: