517217

Christopeit EL 5 - 98253 Manual

16
Zoom out
Zoom in
Previous page
1/56
Next page
16
Assembly Instructions
Before beginning assembly, be sure to observe our recommendations
and safety instructions.
Step 1:
Install of the front footbar (73) and the rear footbar (25) on the main
frame (45) with the carriage bolts (24), the washers 8//20 (10) and the
cap nuts M8 (11).
1. Place screws (24) and two each washers (10), spring washers (79) and
nuts (11) accessibly beside the front and rear parts of the main frame (45).
2. Insert the footbars (73) + (25) in the holder of the main frame (47) and
adjust so that the hole patterns of the holders and the footbars (73) + (25)
are aligned.
3. Push one screw (24) through each hole.
4. Fit the screw ends of (47) with one washer (10), one spring washer (79)
and fasten each with a nut (11).
Step 2:
Connecting the computer cable harness (75) to the computer cable
harness (78), installation of the plastic cover (76) and rubber (77),
installation of the support (81) on the main frame (45) with the round-
headed Allen screws M8x15 (80), the washers 8//16 (10), and the spring
washers for M8 (79).
1. Place screws (80), each washers (10) and spring washers (79) accessibly
beside the front part of the main frame (45).
2. Place the lower end of the support (59) against the main frame (1) and
push the rubber (77) and plastic cover (76) onto the support (81). Plug the
ends of the two computer cable harnesses (75) and (78) projecting from
(45) and (81) together.
(Note: The computer cable harness (78) projecting from the support (81) must
not slide into the tube, as it is required for later steps of installation.)
When joining the tubes, ensure that the cable connection is not trapped.
3. Put one spring washer (79) and one washer (10) on each screw (80). Push
the screws (80) through the holes in the support (81), screw into the threaded
holes of the main frame (45) and tighten fi rmly.
(This screw connection point will screw tightly at least in Step 5)
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit EL 5 - 98253 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EL 5 - 98253 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info