793035
16
Zoom out
Zoom in
Previous page
1/68
Next page
16
GB
ASSEMBLY INSTRUCTIONS
Remove all the separate parts from the packaging,
lay them on the oo and check roughly that all are
there on the base of the assembly steps. Please note
that a number of parts are connected directly to the
main frame preassembled. In addion, there are sev-
eral other individual parts that have been aached to
separate units. This will makes assembly easier and
quicker for you. Assembly me: 60 min.
1. Aach the front foot (93) with preassembled
transportaon roller (92) to the main frame (19). Do
this with the two screws M8x20 (11), washers (14)
and spring washers (12).
2. Aach the rear foot (72) with preassembled
height adjustable screw (99) to the main frame (19).
Do this with the two screws (11), washers (14) and
spring washers (12). Aer assembly has been com-
pleted, you can compensate for minor irregularies
in the foor by turning the foot screw (99). The equip-
ment should be set up that the equipment does not
move of its own accord during a training session.
1. Place screws M8x20 (11), washers and curved
washers (13+14) and spring washers (12) accessibly
beside the front part of the main frame (19).
2. Place the lower end of the support (3) against
the main frame (19) and push the plasc cover (16)
onto the support (3). Plug the ends of the two com-
puter cable harnesses (2+18) projecng from (3+19)
together. (Note: The computer cable harness (2) pro-
jecng from the support (3) must not slide into the
tube, as it is required for later steps of installaon.)
When joining the tubes, ensure that the cable con-
necon will not trapped.
3. Put one spring washer (12) and one washer (14)
or curved washer (13) on each screw (11). Push the
screws (11) through the holes in the support (3),
screw into the threaded holes of the main frame (19)
and ghten frmly. Push the support cover (16) into
right posion.

       -
port (3) at the main frame (19).
STEP 1:
STEP 2:
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit E 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit E 2000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info