Manual Christopeit Delta 1505 (page 18 of 60) (English, German, Dutch, French)

656860

Zoom out

Zoom in

1/60

Assembly Instructions

Remove all the separate parts from the packaging, lay them on the ﬂoor

and check roughly that all are there on the base of the assembly steps.

Please note that a number of parts are connected directly to the main

frame preassembled. In addition, there are several other individual parts

that have been attached to separate units. This will makes assembly

easier and quicker for you. Assembly time: 30 - 40 min.

Step 1:

Attach the stabilizer (31+76) at main frame (43).

1. Attach the front foot (76) with the preassembled transport rollers (74)

to the main frame (43). Do this with the two screws (77), washers (45)

and spring washers (2).

2. Attach the rear foot (31) with eccentric caps (29) to the main frame

(43). Do this with two screws (77), washers (45) and spring washers (2).

After assembly has been completed, you can compensate for minor

irregularities in the ﬂoor by turning end cap (29). The equipment should

be set up that the equipment does not move of its own accord during

a training session.

Step 2:

Attach the front post (68) at main frame (43).

1. Slide the handlebar support cover (26) onto the handlebar support (68).

2. Hold the handlebar support (68) with the computer cable (67) against

the main frame holder. Connect the plug for the computer cable (67)

coming out of the bottom of the handlebar support (68) of the computer

with the matching plug for the motor cable (65) coming out of the main

frame (43).

3. Place the handlebar support (68) in the locator provided for it in the main

frame (43). Ensure that the cable connections made are not squashed.

When putting the steering tube in place, push the former slowly down

into the locator in the main frame. Screw the handlebar support (68)

onto the base frame (43) with the screws (64) and curved washers (45).

4. Push the handlebar support cover (26) into right position to cover up

the screw connection point.

Step 3:

Attach the handlebar (72) at handlebar support (68).

1. Guide the preassembled handlebar unit (72) through the upper part

of the handlebar post (68) and push the pulse cables (73) through the

holes at handlebar support (68) into top position and close the bracket

of handlebar holder.

2. Attach the front handlebar cover (4) at the handlebar holder of handlebar

support (68) and screw the handlebar (72) in desired position at the

handlebar post (68) and tighten ﬁrmly with handlebar screw (8), spacer

(7), spring washer (2) and washer (5).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Delta 1505 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit Delta 1505 Manual

Product: