Manual Christopeit CS 1.1 (page 11 of 44) (English, German, Dutch, French)

679994

Zoom out

Zoom in

1/44

Important Recommendations and Safety

Instructions

Our products are all TÜV-GS tested and therefore represent the highest

current safety standards. However, this fact does not make it unnecessary

to observe the following principles strictly.

1. Assembly the machine exactly as described in the installation instructions

and use only the enclosed, speciﬁ c parts of the machine contained in the

parts list. Before assembling, verify the completeness of the delivery against

the delivery notice and the completeness of the carton against the parts list

in the installation and operating instructions.

2. Check the ﬁ rm seating off all screws, nuts and other connections before

using the machine for the ﬁ rst time and at regular intervals to ensure that

the trainer is in a safe condition.

3. Set up the machine in a dry, level place and protect it from moisture and

water. Uneven parts of the ﬂ oor must be compensated by suitable measures

and by the provided adjustable parts of the machine if such are installed.

Ensure that no contact occurs with moisture or water.

4. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the

machine if the area of the machine must be specially protected against

indentations, dirt etc.

5. Before beginning training, remove all objects within a radius of 2 metres

from the machine.

6. Do not use aggressive cleaning agents to clean the machine and employ

only the supplied tools or suitable tools of your own to assemble the machine

and for any necessary repairs. Remove drops of sweat from the machine

immediately after ﬁ nishing training.

7. Your health can be impaired by incorrect or excessive training. Consult

a doctor before beginning a planned training programme. He can deﬁ ne

the maximum exertion (pulse, Watts, duration of training etc.) to which you

may expose yourself and can give you precise information on the correct

posture during training, the targets of your training and your diet. Never

train after eating large meals. Observe that this machine is not suitable for

therapeutic purposes.

8. Only train on the machine when it is in correct working order. Use original

spare parts only for any necessary repairs.

9. When setting the adjustable parts, observe the correct position and the

marked, maximum setting positions and ensure that the newly adjusted

position is correctly secured.

10. Unless otherwise described in the instructions, the machine must only

be used for training by one person at a time.

11. Wear training clothes and shoes which are suitable for ﬁ tness training

with the machine. Your clothes must be such that they cannot catch du-

ring training due to their shape (e.g. length). Your training shoes should be

appropriate for the trainer, must support your feet ﬁ rmly and must have

non-slip soles.

Contents

1. Summary of Parts Page 3

2. Important Recommendations and Safety Information Page 11

3. Parts List Page 12 - 13

4. Assembly Instructions With Exploded Diagrams Page 14 - 16

5. Computer instructions Page 17

6. Training Instructions Page 18

Dear customer,

We congratulate you on your purchase of this home training sports unit and

hope that we will have a great deal of pleasure with it. Please take heed of

the enclosed notes and instructions and follow them closely concerning

assembly and use.

Please do not hesitate to contact us at any time if you should have any

questions.

Top-Sports Gilles GmbH

12. If you notice a feeling of dizziness, sickness, chest pain or other abnormal

symptoms, stop training and consult a doctor.

13. Never forget that sports machines are not toys. They must therefore

only be used according to their purpose and by suitably informed and

instructed persons.

14. People such as children, invalids and handicapped persons should

only use the machine in the presence of another person who can give aid

and advice. Take suitable measures to ensure that children never use the

machine without supervision.

15. Ensure that the person conducting training and other people never move

or hold any parts of their body into the vicinity of moving parts.

16. At the end of its life span this product is not allowed to dispose over

the normal household waste, but it must be given to an assembly point for

the recycling of electric and electronic components. You may ﬁ nd the symbol

on the product, on the instructions or on the packing.

The materials are reusable in accordance with their marking. With the re-use,

the material utilization or the protection of our environment. Please ask the

local administration for the responsible disposal place.

17. To protect the environment, do not dispose of the packaging materials,

used batteries or parts of the machine as household waste. Put these in the

appropriate collection bins or bring them to a suitable collection point.

18. This machine is a speed-dependant machine, i.e. the power increases

with increasing speed, and the reverse.

19. The machine is equipped with 8-speed resistance adjustment. This

makes it possible to reduce or increase the braking resistance and thereby

the training exertion. Turning the adjusting knob for the resistance setting

towards stage 1 reduces the braking resistance and thereby the training

exertion. Turning the adjusting knob for the resistance setting towards stage

8 increases the braking resistance and thereby the training exertion.

20. This machine has been tested and certiﬁ ed in compliance with EN 957-1

and –9 “H. C”. The maximum permissible load (=body weight) is speciﬁ ed

as 100 kg.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CS 1.1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit CS 1.1 Manual

Product: