Manual Christopeit CL1 - 1302 (page 20 of 40) (English, German, Dutch, French)

644101

Zoom out

Zoom in

1/40

Computer instructions for 1302

The supplied computer allows the most convenient training. Every value

relevant to training is displayed in a corresponding window.

From the beginning of the training session, the required time, the current

speed, the approximate calorie consumption, the travelled distance ad the

current pulse rate are displayed. All values are counted from zero upwards.

The speed is indicated on the upper display. All other values are indicated

on the lower display.

If you wish to see one value displayed constantly as well as the speed

during training, select this with the „F“ key. If you wish to see these values in

constant alternation, select the „SCAN“ function. The display then changes

from one function to the next at intervals of approx. 6 seconds.

The computer is switched on by brieﬂy pressing the F- key or simply by

beginning training. The computer begins to register and display all values.

To stop the computer, just stop training. The computer stops all

measurements and retains the last attained values. The last attained values in

the functions TIME, CALORIES and KM are stored and training can continue

with these values when training is resumed.

The computer switches of automatically approx. 4 minutes after training

is stopped. All values attained until that time are stored and are displayed

again when training is resumed. It is then possible to continue training from

these values.

Displays:

1. „SPEED“ (KM/H) display:

The current speed is displayed in kilometres per hour. The values last attained

by this function are not stored. (Limit of the display: 99.9 km/h.)

2. „TIME“ (ZEIT) display:

The currently required time is displayed in minutes and seconds. The values

last attained by this function are stored. (Limit of the display: 99.59 minutes.)

3. „DIST (KM)“ display:

The current status of the travelled distance is displayed. The values last

attained by this function are stored. (Limit of the display: 999,9 km.)

4. „CALORY“ (CAL) display:

The current status of the consumed calories is displayed. The values last

attained by this function are stored. (Limit of the display: 9999 calories.)

5. „KM TOTAL“ (ODO) display:

The current status of the travelled kilometres of all previous training sessions

including current training session is displayed. The values last attained by

this function are not stored. (Limit of the display: 9999 km.)

6. „PULSE“ display:

The current pulse rate is displayed in beats per minute. The values last

attained by this function are not stored. (Limit of both displays: 40 – 240

pulse beats per minute.)

Note:

For pulse measurement, the two contact surfaces of the pulse measuring

handle unit must be gripped simultaneously. The contact surfaces should

be located centrally in the palms of the hands.

7. „SCAN“ function:

If this function is selected, the current values of all functions are displayed

successively in a constant sequence approx. every 5 seconds.

Keys:

1. „F“ key:

Pressing this key once brieﬂy makes it possible to change from one function

to another, i.e. the respective functions can be selected. The currently

selected function is indicated by an icon in the respective window. If the

key is held longer (approx. 3 seconds), all last attained values are deleted

with the exception of the values in the „KM TOTAL“ display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CL1 - 1302 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit CL1 - 1302 Manual

Product: