585804
13
Zoom out
Zoom in
Previous page
1/40
Next page
13
Assembly Instructions
Remove all the separate parts from the packaging, lay them
on the floor and check that all are there on the basis of the
packing list in these instructions for assembly and use. Please
note that a number of parts have been connected directly to
the main frame and preassembled.In addition, there are seve-
ral other individual parts that have been attached to separate
units. This will make it easier and quicker for you to assemble
the equipment.
Step 1:
Attach the front foot (33) at main frame (1).
1. Place the front foot (33) into the holder in front of the main frame
(1) and screw it tightly by using 2 carriage bolts M8x75 (30),
washers (31) and cap nut (32).
English
Step 2:
Attach the slide rest (18) with seat (13) at seat rail (22).
1. Remove the cushion pads (24) and steel angle (44) from seat rail
(22).
2. Push the slide rest (18) with preassembled seat (13) through the
seat rail (22) as showed in Figure Step 2, so that 4 pulleys can
roll onto the top side and 2 pulleys can roll onto the bottom side
of seat rail (22).
3. Fix the cushion pads (24) at appropriate position on bottom
side of seat rail (22).
4. Put the steel angle (44) at appropriate position of bottom side
of seat rail (22) and tighten with screws (45) firmly to secure the
vertically position of seat rail (22) during fold up position.
Step 3:
Attach the rear foot (29) at seat frame (22).
1. Put the rear foot (29) into the holder at seat frame (22) and
screw it tightly by using screw M8x95 (25), washers (15) and
self locking nut (9). Don’t tighten too much that it can move for
fold up.
2. Place the rear foot cover (28) onto the rear foot (29) and secure
by screws (27).
3. Screw in the hand grip screw (2) to secure the rear foot (29) at
seat frame (22).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit Cardiff roei at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Cardiff roei in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info