Manual Christopeit BT 4 (page 20 of 76) (English, German, Dutch, French)

793038

Zoom out

Zoom in

1/76

Assembly Instructions

Remove all the separate parts from the packaging, lay them on the ﬂoor

and check that all are there on the basis of the step drawings in these

instructions for assembly and use. Please note that a number of parts

have been connected directly to the main frame and preassembled.

In addition, there are several other individual parts that have been at-

tached to separate units. This will make it easier and quicker for you

to assemble the equipment. Assembly time: 30 - 40 min.

Step 1:

Attach the stabilizer (2+3) at main frame (1).

1. Attach the front foot (2) with the preassembled transport rollers (10)

to the main frame (1). Do this with the two screws M8x75 (5), washers

8//25 (6), spring washers M8 (24) and cap nuts M8 (7).

2. Attach the rear foot (3) to the main frame (1). Do this with the two screws

(5), washers (6), spring washers (24) and cap nuts (7). After assembly

has been completed, you can compensate for minor irregularities in

the ﬂoor by turning the adjusting end cap (4). The equipment should

be set up that the equipment does not move of its own accord during

a training session.

Step 2:

Attach the pedals (9R+9L) at pedal crank (8).

1. Attach the pedal straps to the appropriate pedals (9R+9L).

NOTE: The end with many adjustable holes must be set outwards.

2. The pedals (9R+9L) are marked with „R“ & „L“

NOTE: Right and Left is speciﬁed as viewed seated on the machine

during training.

Connect each pedal (9R+9L) to the matching pedal crank (8R+8L)

(NOTE: The right pedal „R“ should be threaded on clockwise. The left

pedal „L“ should be threaded on counter-clockwise.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit BT 4 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit BT 4 Manual

Product: