Manual Christopeit AX 4000 (page 22 of 64) (English, German, Dutch, French)

793199

Zoom out

Zoom in

1/64



Use only a less wet cloth for cleaning.  Never use benzene, thinner or other aggressive cleaning agents for surface cleaning as this dam-

age caused the device is only for private home use and for use suitable indoors. Keep the unit clean and moisture from the device.



Plug out the power supply unit while intending the unit for more than 4 weeks not to use. Push the saddle slide toward the handlebar and the

seat support tube as deeply as possible into the frame. Choose a dry storage in-house and put some spray oil to the pedal bearings le and right,

to the thread of the handlebar bolt, and on the thread of the quick release for saddle support. Cover the bike to protect it from being discolor by

any sunlight and dirty through dust.



We recommend every 50 hours to review the screw connecons forghtness, which were prepared in the assembly. Every 100 operang hours,

you should put some spray oil at the pedal bearings le and right, to the thread of the handlebar bolt and to the thread of quickrelease for sad-

dle support.



Training area in mm

(for home trainer and user) Free area in mm

(Training area and security area

(rotang 60cm))

If you cannot solve the problem with the following informaon, please contact the authorized service center.



  

Computer has no value at Dis-

play if you press any key. No power adapter is well plugged or wall

power is without power. Check that the power adapter is properly plugged in, possibly

with another electric device check if the wall power is ne.

Computer is not counng data

and do not switch on aer start

cycling.

Sensor impulse missing base on not well

plugged connecon Check the plug connecons at computer and inside of handle-

bar support.

Computer is not counng data

and do not switch on aer start

cycling.

Sensor impulse missing base on not cor-

rect posion of sensor. Take o the cover and check the distance between magnet and

Sensor. The magnet at turning belt wheel should have only less

than < 5mm distance against the sensor posion.

No pulse value Pulse cable is not plugged in. Check the separately pulse cable is well connected with compu-

te r.

No pulse value Pulse sensors not well connected Screw out the screw for pulse measurement and check if plugs

are well connected and no damage at pulse cable.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit AX 4000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit AX 4000 Manual

Product: