793199
15
Zoom out
Zoom in
Previous page
1/64
Next page
15
GB

Remove all the separate parts from the packaging,
lay them on the oo and check roughly that all are
there on the base of the assembly steps. Please note
that a number of parts are connected directly to the
main frame preassembled. In addion, there are sev-
eral other individual parts that have been aached to
separate units. This will makes assembly easier and
quicker for you.
Assembly me: 30 - 40 min.
 Aach the front stabilizer (69) assembled with
front caps withtransportaon roller (70) to main
frame (49) by using bolts M8x45 (73),washers (30),
spring washers (29) and cap nuts (48).
 Aach the rear stabilizer (72) assembled with
height adjustable caps (71) to main frame (49) by us-
ing bolts (73), washers (30), spring washers(29)and
cap nuts (48). (For uneven oor, you can adjust the
height atrear caps (71) and secure for stable posion)
 Aach the pedal straps to the pedals (59L+59R).
(The pedal strap andpedals are marked with “Lfor
le and “R” for right.)
 The pedals (59L+59R) are marked with „R“ for
right and „Lfor le.NOTE: Right and Le are speci-
ed as viewed seated on the machineduring training.
Connect each pedal (59L+59R) to the matching pedal
crank (60L+60R). ( The right pedal „R“ should
be threaded on clockwise. The lepedal „L should
be threaded on counter-clockwise.)




 Push the rubber ring (74) and the support cover
(75) onto handlebarsupport (21).
 Aach the handlebar support (21) to the holder
at main frame (49) andconnect the plug of connec-
on cable (22) to motor cable (23).
 Insert the handlebar support (21) to main frame
(49) and secure by using bolts M8x20 (24), spring
washers (29) and curved washers (25). (
Ensure that the cable loom are not crunched or
pinchedduring installaon.)
 Push the handlebar support cover (75) with rub-
ber ring (74) into right posion to cover up the screw
connecon point.


15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit AX 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit AX 4000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info