Manual Christopeit AM6 - 1127 (page 19 of 60) (English, German, Dutch, French)

644076

Zoom out

Zoom in

1/60

English

Step 3:

Installation of the pedal supports (41), connecting tubes (24) and

pedals (42).

1. Place the preassembled unit of the right pedal support (41) and one

connecting tube (41) at the right hand side of the main frame (48).

(Note: Right is speciﬁed as viewed standing on the machine during

training.)

2. Put one wave washer (60) onto the pedal crank (53).

3. Push the connecting tube (24) onto the axles’ end of handlebar support

(15) and put the pedal holder (41) at the pedal axle (53) at the same time.

Put on the screw (22) a washer 8//32 (23) and tighten the connection

tube (23) at handlebar post (15) ﬁrmly. Then tighten the pedal support

holder (47) at pedal crank (53) with washer 10//32 (46) and self locking

nut (45).

4. Install the left pedal support (41) incl. all additionally required parts on

the left hand side of the machine as described in 1. – 3.

5. Push the right pedal (42R) onto the right pedal holder (41). Adjust the

holes in the parts so that they are aligned.

6. Push the screws (39) from above through the holes. Push on a washer

(36) from the opposite side and screw on a nut (37) and tighten ﬁrmly.

7. Install the left pedal (42L) on the left footrest holder (41) as described in

5. – 6. (Note: The right and left footrests can be discerned by the edges

of the longitudinal sides of the footrests. The high edges of the footrests

(42R) and (42L) must point inwards (towards the main frame.))

Step 4:

Installation of the hand grips (17) on the connecting tubes (24) and of

the computer (40) at handlebar support (15).

1. Put the handgrip bars (17L+17R) onto the connecting tubes (24) and

adjust the holes in the tubes so that they are aligned. (Note: the handgrip

bars must be aligned after assembly so that the upper ends are inclined

outwards (away from the support (15)).

2. Push the bolt (26) through the holes and tighten the handgrip bars (17)

with washers (20) and spring washers (6) at connection tubes (24) ﬁrmly.

3. Connect the plugs of pulse cables (8) and pulse connection cables (3)

4. Put the plug of connection cable (11) into the socket from monitor (40)

backside and insert the plugs of pulse connection cables (3) to the jack

of the monitor (40). Attach the monitor (40) to top monitor bracket of

front post (15) with screws (9) and washer (85).

(Attention: Ensure that the cable looms are not crunched or pinched

during installation.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit AM6 - 1127 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit AM6 - 1127 Manual

Product: