574369
15
Zoom out
Zoom in
Previous page
1/26
Next page
IRIS Touch 400 Range Dialler Installation Manual V1.4
9
5. Configuring the IRIS Touch Dialler
The majority of configurations can be carried out via the touch screen interface
display on the IRIS dialler. For more complex systems, for example where the
data port is used, additional configuration is available via the USB connector
using a laptop / PC and IRIS dialler configuration software (www.chironsc.com).
The touch screen display on the IRIS dialler provides an Installation Wizard
which guides you through a set of instructions for configuring the dialler. It is
recommended that you use this Wizard as it automatically carries out tests as
you proceed through the configuration.
Note: To select an option on the screen, touch the screen display.
Use the following procedure to configure the IRIS Touch Dialler:
1. Plug the power cable into the battery backed supply of the alarm panel. The
cable with the white stripe is the ve connection. Ensure that the display on
the dialler becomes active.
The dialler carries out a self test and the Welcome screen then displays.
Note: If the power has been connected for the first time the Language
menu displays. Select the appropriate language from the list of languages
available.
2. Select the Installer Menu or Touch to configure option from the Welcome
screen. It is necessary to enter a pin number, which is set by default to
“111111”. It is strongly recommended that this pin number is changed from
the default, which is an option available in the Settings menu.
3. Select the Installation Wizard option from the Installation Menu.
4. Follow the remaining instructions on the screen.
Note: During the installation procedure the Wizard shows the GSM/GPRS
signal strength. At this time the antenna position can be adjusted for
optimum signal. (GSM / Ethernet & GPRS only.)
Once the installation is completed successfully the message Status -
System OK is displayed on the Welcome screen and the LED Indicator on
the PCB [6] is on steady.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chiron IRIS Touch 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chiron IRIS Touch 400 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Chiron IRIS Touch 400

Chiron IRIS Touch 400 Quick start guide - English - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info