797337
6
Zoom out
Zoom in
Previous page
1/14
Next page
4
hinge, then remove the shaft and pin screw.
8. Insert the pin screw into the right hole and insert the pin shaft into the left hole on
the lower hinge, then secure the shaft with the washer and nut.
9. Install the lower hinge on the left side of the cabinet.
10. Remove the screw that secures the door stops from the bottom right of the
refrigerator compartment door, then remove the door stops and install to the bottom left
side.
11. Install the refrigerator compartment door.
12. Move the door bushing from the top right side of the refrigerator door to the top left
side of the door. And move the left hole cover to the right side.
13. Remove screws and the center hinge screw hole plug on the left side of the cabinet,
then install in the screw holes on the right side of the cabinet.
14. Install the center hinge to the left side with the two screws you removed previously.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chiq CTM347NB2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chiq CTM347NB2 in the language / languages: English as an attachment in your email.

The manual is 1.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info