767931
11
Zoom out
Zoom in
Previous page
1/64
Next page
10
11
WARNING: Do not use the prod-
uct if some of its parts are dam-
aged, torn or missing.
WARNING: This baby walker
should be used only for short peri-
ods of time (e.g., 20 min).
WARNING: This baby walker is in-
tended to be used by children who
can sit unaided, approximately from
6 months. It is not intended for chil-
dren weighing more than 12 kg.
WARNING: Do not use replacement
parts other than those approved by
the manufacturer or distributor.
WARNING: Before use, ensure that
all the safety devices are tted and
working correctly.
WARNING: Keep your child away
from all moving parts whilst you
adjust the baby walker.
The baby walker is not suitable for
children over 85 cm in height.
To avoid all risks of strangulation,
never give children objects with
cords or strings attached, or leave
them near such objects. Watch out
for curtain and blind cords, etc.
The baby walker is not designed
to be used when feeding a child;
do not use when feeding to avoid
damages or malfunctions of electri-
cal parts due to contact with food.
Keep all plastic bags and small toys
away from children to prevent the
risk of suocation.
Never leave the product exposed
to bad weather or direct sunlight.
If the baby walker is left exposed to
direct sunlight for a long time, al-
low it to cool down before let your
child use it.
Prolonged exposure to sunlight
can cause fading in fabric and ma-
terials colours.
Do not use this product with tem-
perature below 5 °C or on slippery
and/or icy surfaces.
Do not use this product as a sledge
or raft in the water.
Check the baby walker regularly for
signs of wear and damage.
Always check that the stoppers are
tted correctly and show no sign of
damage or tear.
Do not allow other children to climb
onto or play without the supervision
of an adult near the baby walker.
When not in use, store the baby
walker in a suitable place, away
from contact with all weather con-
ditions and out of the reach of chil-
dren.
CLEANING & MAINTENANCE
The cleaning and maintenance operations must only be
carried out by an adult.
Clean the fabric and plastic parts including the stopper
with a damp cloth.
Do not use solvents or abrasive products for cleaning.
Dry the metal parts to prevent the formation of rust.
PADDED SEAT COMPOSITION:
100% polyester outer layer, 100% polyurethane inner layer
Wash by hand in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
COMPONENTS/PARTS
A) Structure of the baby walker
B) Upholstered padded seat
C) Rigid spoiler
D) 2 front swivel wheels
E) 2 rear xed wheels
F) 6 stoppers
G) Electronic toy panel
H) Padded seat xing bands
I) Bar support
FIRST ASSEMBLY OF THE BABY WALKER
1. Turn over the structure (A) of the baby walker. Attach the
front wheels (D) in their slots as shown in gure 1. Make
sure the wheel pin has come to its limit.
2. Attach the rear wheels (E) in their slots as shown in gure
2. Make sure the pin has come to its limit: a click will be
heard and the fastening pin will appear from the hole.
3. Secure all the stoppers (F) in their slots as shown in gure
3. Make sure that the pins of all the stoppers have come to
their limit.
4. Bring the baby walker to position for use by turning the
wheels to the oor (levelled and horizontal); slowly lift the
upper part of the structure as shown in gure 4, by pulling
it upwards until it clicks into place in the desired position.
WARNING: Before putting the child in the baby walker,
make sure the knob located below the upper part of the
structure has reached its engagement position: a click will
be heard to indicate it is locked (g. 4a). Then push down
the structure to ensure the proper engagement.
5. Insert the front tabs of the rigid spoiler (C) into the slots
cut on the upper part of the structure (A) and push down
on the back until a click is heard locking them (g. 5).
WARNING: Once the spoiler is inserted it’s no longer possi-
ble to pull it out. Do not try to remove it with a screwdriver
or other tool.
6. Insert the padded seat plastic rings (B) in the slots
formed along the top edge of the baby walker (g. 6) and
make sure they are properly locked in the shown position
(g. 7-8).
7. The electronic toy panel with sounds and lights can be
placed on the upper part of the structure with a simple
pressure (g. 9); It does not require any type of xing. Bat-
teries not included; the toy has two holes located under it
to allow to x the toy on dierent parts of the baby walker,
through the included xing bands (g. 10).
WARNING: To prevent the risk of suocation, the electron-
ic toy panel must be xed to other parts using only items
included (xing bands), do not add laces.
WARNING: When the toy is not xed to other parts keep
the bands out of reach of children; do not place the toy on
the baby walker with the xing bands mounted.
WARNING: The bar support must be installed by the par-
ent before allowing the baby to use the walker.
8. The bar support (I) with movable toys is installed by in-
serting side intersections in their seats on the top of the
structure, pushing down until they click (g. 11-12).
HEIGHT REGULATION OF THE BABY WALKER
WARNING: When opening, closing or regulating the baby
walker, make sure that your child is at a safe distance.
9. To open the baby walker slowly lift the upper part of the
structure by pulling it upwards and supporting it from be-
low until it clicks into the desired position (g. 4).
10. To adjust the seat height, after taking the child from the
baby walker, push the upper part of the structure upwards
until it clicks into its locked position. To lower the height
move the knob located below the upper part of the struc-
ture and turn it counter-clockwise (g. 13), push the knob
up, accompany the upper part to the desired position (g.
14). Upon release of the pin, the structure is automatically
locked. The height can be adjusted to three dierent po-
sitions.
WARNING: Before putting the child in the baby walk-
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chicco Walky Talky at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Walky Talky in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info