Manual Chicco Sirio 012 (page 27 of 224) (All languages)

767877

Zoom out

Zoom in

1/224

between the backrest and the seat (Fig. 17).

WARNING! Pull the car seat towards you and

then check that the two indicators are green

(Fig. 18) to make sure that the seat has been

installed correctly.

WARNING! Make sure there are no objects

between the child car seat and the vehicle

seat or between the child car seat and car

door.

Push the child car seat rmly against the back-

rest of the car seat (Fig. 19) to make sure it is

securely in place.

The assembly of the child car seat is complet-

ed exclusively with the installation of the Top

Tether (T).

WARNING! Refer to your car’s user manual to

identify where the Top Tether of the child car

sear is attached to the car. This fastening point

is denoted with a specic label (Fig. 20) and

can be found in the positions indicated by the

gures 21A – 21B – 21C – 21D.

WARNING! Check that the Top Tether fasten-

er used is the one that has been specially des-

ignated. Do not confuse it with a ring used for

hanging bags (Fig. 22).

WARNING! Pass the Top Tether between the top

of the car seat backrest and the headrest. Never

pass the Top Tether above the car headrest.

Extend the Top Tether belt by pressing adjust-

ment button (V).

Once you have identied the fastening point,

connect to the Top Tether hook (U).

Adjust the length of the Top Tether belt by

forcefully pulling the belt until it is tight. The

indicator on the belt goes green (W) when

the tether is suitably tight (Fig. 23). Roll up any

excess belt and tie up using the velcro.

WARNING! In case of use in vehicles equipped

with rear seat belts with integrated airbags (in-

atable belts), the interaction of the inatable

portion of the vehicle’s belt with this child re-

straint can result in serious injury or death! Do

not install this child restraint using an inatable

seat belt.Install using ISOFIX instead, or move

the car seat to a position with a suitable seat

belt type. When installing with ISOFIX, the unu-

sed seat belt should not be buckled behind the

Child Restraint System as this will engage the

inatable portion of the belt.

To disassemble the child car seat, unhook the

Top Tether and the Isox connectors by press-

ing the release buttons (Q) (Fig. 24). To put

them back in completely push them inwards.

When seating your child refer to paragraph 13.

SEATING THE CHILD IN THE CHILD CAR SEAT

6. HOW TO FIT THE GROUP 1 (9-18 kg)

CHILD CAR SEAT TO THE CAR WITH A

3-POINT SEAT BELT

WARNING! Never t the seat belt in any way

not mentioned in this manual.

The slots for the car seat belts are clearly

marked on the child car seat with red colour

guide items.

Position the child car seat on the selected seat.

WARNING! Make sure there are no objects

between the child car seat and the vehicle

seat or between the child car seat and car

door.

Pull the car seat belt, and slide it through the

space between the backrest and the base of

the child car seat (Fig. 25).

Pass the abdominal part of the car’s 3-point

seat belt through the specic red abdominal

belt guides (M). Pull it out from the other side

of the child car seat and fasten it to the buckle

of the seat until you hear a “CLICK” (Fig. 26).

Continue to assemble on the side of the re-

tractable part of the belt. Completely insert

the belt in the red clamp (L), holding it open

(Fig. 27).

After completing the assembly it is necessary

to make the safety harness as tight as possible.

Pull the diagonal part hard towards the retrac-

tor and fasten with the red clamp (L) (Fig. 28).

WARNING! Check that the child car seat is t-

ted rmly in place and adheres correctly to the

vehicle seat; check that the seat belt is tight. If

the child car seat is not tightly and safely tted

into the car seat, repeat the installation.

WARNING! In case of use in vehicles equipped

with rear seat belts with integrated airbags (in-

atable belts), the interaction of the inatable

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Sirio 012 in the language / languages: All languages as an attachment in your email.

The manual is 13,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chicco Sirio 012 Manual

Product: