Manual Chicco Polly Swing Up (page 20 of 68) (All languages)

767912

Zoom out

Zoom in

1/68

or equivalent to the type recommended for

the correct function of this product. (for the

remote control: LR03-AAA; for the vibration

block: LR20-D; for the side xture: LR14-C).

• The use of rechargeable batteries is not rec-

ommended as the product may not work

properly.

• Rechargeable batteries must only be re-

charged under adult supervision.

• Rechargeable batteries must be removed

from the product during recharging.

• Remove the batteries from the product be-

fore disposing of the product.

• Always keep batteries and tools out of the

reach of children.

• To replace batteries: loosen the screw on the

battery compartment cover with a screw-

driver and open the cover. Then remove the

spent batteries and t new ones, ensuring

that they have been tted in the correct po-

larity (as shown on the product), replace the

battery cover, and tighten the screw.

This product complies with the Directive

2012/19/EU.

The crossed bin symbol on the appliance indicates

that the product, at the end of its life, must be dis-

posed of separately from domestic waste, either

by taking it to a separate waste disposal site for

electric and electronic appliances or by returning

it to your dealer when you buy another similar ap-

pliance. The user is responsible for taking the appliance to a special

waste disposal site at the end of its life. If the disused appliance is

collected correctly as separate waste, it can be recycled, treated

and disposed of ecologically; this avoids a negative impact on

both the environment and health, and contributes towards the re-

cycling of the product’s materials. For further information regard-

ing the waste disposal services available, contact your local waste

disposal agency or the shop where you bought the appliance.

CARE AND MAINTENANCE

Fabric composition

LINING COVER: All new materials. Outer cover: 100% polyester. Pad-

ding: 100% polyester.

BOOSTER CUSHION: All new materials. 100% polyester outer cover.

100% polyester padding.

TOY: All new materials. 100% polyester.

• This product requires periodic maintenance.

• The cleaning and maintenance operations must only be carried

out by an adult.

• Periodically inspect the swing to check for broken, torn or miss-

ing parts: if this is the case, do not use it.

• Please refer to the care label for instructions on how to wash the

fabric parts.

Hand wash in cold water

Do not bleach

Do not use a dryer

Do not iron

Do not dry clean

• Check that the fabric and stitching are in good condition each

time you wash it.

• Prolonged exposure to direct sun light or heat may cause the

fabric to fade or parts to deform.

Clean the frame structure with a damp cloth and neutral deter-

gent. Do not soak the frame in water.

REMOVABLE COVERS

• Remove the tray by pressing the two orange side buttons whilst

pulling it upwards.

• Remove the head rest and booster cushion, slide out the harness

straps through their holes.

• Slide the waist strap out through the plastic rings located at the

bottom of the seat.

• Unhook all the elastic rings from the plastic hooks on the bottom

side of the seat. Now remove the harness straps fastened to the

bottom of the fabric backrest, sliding them through the slots on

the outer edge of the seat. Now undo the zip, slide the upper

straps through the padding and remove the fabric part.

• To ret the cover on the frame, repeat the above procedure in

the reverse order, making sure that you hook all the elastic rings

back onto their relative hooks to ensure the padding is fastened

correctly to the frame.

COMPONENTS

a. Top tube of the seat

b. Frame connection tubes

1. Side sun hood hooks

c. Side xture X (with remote control)

1. Battery compartment

d. Side xture Y

e. Front and rear legs

f. Seat

1. Side backrest adjuster button

2. Vibration block

3. Fabric crotch strap

4. Side compartment for the connection tube

5. Connection xture for the dual tray

g. Dual tray

1. Side button

2. Rigid crotch strap

3. Tray

4. Second tray

h. Booster seat

i. Waist strap

j. Upper harness strap

k. Remote control

l. Sun hood

m. Toys

ASSEMBLING THE FRAME

1. Grasp the front and rear legs, and insert them into the X and Y

xtures on the tubes, as seen in Diagram 1. When the legs are

assembled correctly, the metal pins will slot into the holes on

the xture tubes. At this point you will hear them click into place.

2. Press the xture side buttons (Diagram 2) and open the frame by

pushing the front and rear legs apart. The seat can now be tted.

ASSEMBLING THE SEAT

3. Open the zip on the back of the fabric backrest as far as possible

(Diagram 3) and slide the upper seat tube into the slots inside

the backrest, as seen in Diagram 4. Make sure you hear the metal

pins click into place.

4. Thread the upper harness straps through the slots in the back-

rest (Diagram 5). Now cover the upper tube with the fabric and

close the zip (Diagram 6).

5. Hook all the elastic rings onto the plastic hooks on the bottom

of the seat (Diagram 7).

WARNING: Check that the seat fabric is tted correctly before using

the swing.

6. Take hold of the connection tubes on the seat frame (compo-

nent b) and insert the round shaped end into the slots at the side

of the seat (Diagram 8), making sure that the side hooks on the

sun hood are facing inwards towards the swing. Make sure you

30° C

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Polly Swing Up in the language / languages: All languages as an attachment in your email.

The manual is 3,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chicco Polly Swing Up Manual

Product: