Manual Chicco Next 2 Me Air (page 23 of 76) (All languages)

767857

Zoom out

Zoom in

1/76

30° C

during alignment of the crib to the bed.

In order to rotate the feet pull the rotation release button using

one hand and turn the feet of the crib inward (g. 27).

WARNING: Use of the product is only permitted with beds

and/or mattresses with straight sides. Use of the product

with round beds and/or mattresses or water beds is not per-

mitted.

WARNING: When the product is used in the “Bedside sleeper

mode” (xing to the bed, it should always be tted to the long

side of access to the bed. DO NOT x the product to the head

or bottom of the bed.

MAINTENANCE ADVICE

The crib and the mattress have a resistant fabric cover, which is

completely removable and washable.

The removal/application activities should be carried out by

adults only. On a regular basis check the condition of the

product and the presence of any possible damage. In the

case of damage do not use it and keep it out of the reach

of children.

For washing of the fabrics, carefully comply with the instruc-

tions indicated on the label.

For cleaning do not use solvents, abrasive products or aggres-

sive products.

Hand wash in cold water

Do not bleach

Do not tumble dry

Do not iron

Do not dry clean

After each wash check the resistance of the fabric and of the

stitching.

WARNING: During the removal and/or application of the lin-

ing, handle the fabric carefully in order to avoid accidental

damage or tears.

WARNING: the removal and/or application operations may

take a few minutes and should be carried out by an adult.

MAKING THE BED

It is possible to unfasten the crib from the parents’ bed in order

to make the bed easily. Just unfasten the grey buckles located

below the fabric nish.

To re-secure the crib to the parents’ bed, pull once again the

belts to make sure the crib is properly and rmly secured to the

parents’ bed. Pay attention to follow all the steps previously men-

tioned in paragraph ‘’Bedside sleeper mode (Fixing to the bed)’’.

REMOVABLE LINING

17. Remove the mattress and release the buttons on the lower

part of the fabric structure (g. 28).

18. Press the buttons located on the legs’ fastening point (g.

29) and pull the upper tubular structure upward, removing

the fabric lining from the legs (g. 30). Perform these opera-

tions on both sides.

19. Open the lateral zips on the window opening and press the

release buttons of the upper removable tubular structure

as explained in paragraph ‘‘Bedside sleeper mode (Fixing to

the bed)’’. Then pull out the removable upper tubular struc-

ture (g. 31), paying attention not to damage the internal

part of the lining.

20. Open the zip located on the upper edge of the crib and

remove the fabric lining completely (g. 32).

DISASSEMBLING THE CRIB

The crib can be fully disassembled in order to store it in the bag

supplied with the product. To disassemble the crib, repeat the

operations described in points 17-18 of paragraph ‘’Removable

lining’’. Then unfasten the central support structure by pressing

the fastening pins on both crib’s legs (g. 33).

WARRANTY

The product is guaranteed against any conformity defect in

normal conditions of use as provided for by the instructions

for use.

The warranty shall not therefore apply in the case of damages

caused by improper use, wear or accidental events.

For the duration of warranty on conformity defects please re-

fer to the specic provisions of national laws applicable in the

country of purchase, where provided.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Next 2 Me Air in the language / languages: All languages as an attachment in your email.

The manual is 5,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chicco Next 2 Me Air Manual

Product: