500768
14
Zoom out
Zoom in
Previous page
1/124
Next page
14
15
DESCRIPTION OF THE PARTS
A Isofix connectors
B Abdominal seat belt passage guide
C Compartment for storing the instruc-
tion booklet and 2 protective Isofix
connector caps
D Red/green indicator to signal that the
child car seat has, or has not, been
fitted correctly
E Support leg
F Isofix system adjuster lever
G Protective caps for Isofix connectors
H Release buttons
I Isofix system correct installation in-
dicator
L Support foot adjuster lever
M Red incorrect installation indicator
N Green support leg correct installation
indicator
INSTALLATION AND REMOVAL
FOR VEHICLES WITH THE ISO-
FIX SYSTEM
Installation
1. Remove the Isofix (A) connectors from
the base using the adjuster lever (F)
(Diag. 8).
Keep the lever up, and pull out the
ISOFIX system COMPLETELY (Diag. 8).
Ensure that the system has been pulled
out as far as possible.
2. Remove the Isofix connectors protec-
tion caps (G) using the release but-
tons (H) (Diag. 9a and 9b). Repeat
this procedure for both connectors.
Place the two caps in their compart-
ment (C)
WARNING! Store the caps carefully,
since they are indispensable for reinsert-
ing the ISOFIX system on the base when
the system is not in use.
3. Position the Isofix base on the rear
vehicle seat and fasten the Isofix con-
nectors to the anchorage points found
between the back rest and the car seat
(Diag. 10). You will hear a “click” when
the connectors fit into place.
WARNING! Check that the two in-
dicators (I) are green which means the
system has been installed correctly.
4. Push Isofix Base firmly against the
backrest of the car seat (Diag. 11) to
ensure maximum adherence.
5. Pull the base towards you a couple of
times to ensure the two connectors
are locked in place.
6. Position the support foot (E) and use
the adjuster lever to fix it in place (L)
(Fig. 12). Check the indicators (M and
N) on the foot to ensure it is fitted
correctly. When you can see the green
indicator (N), this means you have
installed it properly.
WARNING: Before attaching the child
car seat onto the base, check that the
stabiliser block is closed (Diag. 13).
7. Attach the child car seat onto the base
(in a rear-facing position) and push it
downwards until you hear it click into
place (Diag. 14).
8. The indicator on the side (D) will turn
green (Diag. 15) when the child car
seat is securely and correctly locked
in place.
9. Check that the child car seat is cor-
rectly fitted to the base by trying to
lift the front and rear sections.
10. When it has clicked into position,
turn the child car seat handle bar as
far as possible (A) against the vehicle
seat backrest (Diag. 15).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chicco Isofix Base voor Auto Fix Fast at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Isofix Base voor Auto Fix Fast in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info