767918

Chicco Easy Touch Manual

16
Zoom out
Zoom in
Previous page
1/96
Next page
16
17
Press the “Measure” button, and gen-
tly scan around the temple area( Fig.5
) , you can select the left side of the
left temples or the right side of the
right temples. Measurement has been
completed after a long beep is heard.
(The time of measurement might be
between 5~8sec (up to 30sec). That
depends on when the thermometer
get the highest temperature of the
forehead.)
Note: the temperature can be differ-
ent between right and left temple: it
depends on the fact that the deepness
and the dimension of the temporal
artery can be different in left and
right part.
The thermometer can work in SCAN
Mode too. To select the SCAN mode:
While the unit is ON, hold down the
“ON/MEM” button, and press the
“Measure” button, then the icon
will replace “HEAD” icon in the LCD
display (see figure 6)
Figure 6
Measuring temperature under SCAN
mode: When you press the “Measure”
button, you will get the temperature
immediately about 0.6 sec. If you
hold down the scan button, the read-
ing of measurement will be continu-
ous updated. (This mode shows the
actual, unadjusted temperatures of
the objects, which is different with the
forehead mode.)
IMPORTANT
To constantly obtain accurate results,
always direct the thermometer to the
same area of the forehead every time
you measure temperature. To take
repeated measurements, always scan
the same area of the forehead. Wait
for at least 2 minutes between con-
secutive measurements to avoid
the overheating of the sensor, which
may detect non-consistent values.
Holding the thermometer
too long and/or expose the device to
external heating source may cause a
higher ambient temperature reading
of the sensor. This could make the
body temperature / object tempera-
ture measurement lower than usual.
MEMORY FUNCTION
While the thermometer is On, press
the “ON/MEM” button to see the
temperature stored. This thermom-
eter provides 25 sets memory for
the last measurements. ** Please be
noted that only the “HEAD” func-
tion’s reading will be recorded. (When
the thermometer is turned off, the
last measurement data is saved into
memory.)
CELSIUS (°C) / FAHRENHEIT (°F)
DEGREES SELECTOR
To change the LCD from °C to °F:
When the unit is OFF, hold down the
“Measure” button, then press and
hold the “ON/MEM” button until
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chicco Easy Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Easy Touch in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info