747192
65
Zoom out
Zoom in
Previous page
1/78
Next page
65
9.1.2.2. Locking of the sampling frequency
As default, the sampling frequency is locked to V1.
If V1 is missing, the instrument attempts to lock to V2, then to V3, I1, I2, and I3.
9.1.2.3. AC/DC
The PEL makes AC and DC measurements for AC and DC distribution networks. AC or DC is selected by the user.
The AC + DC values are available with PEL Transfer.
9.1.2.4. Neutral current measurement
Depending on the distribution network, if there is no current sensor on the IN terminal, the neutral current is determined by calculation.
9.1.2.5. "200ms" quantities
The instrument calculates the following quantities every 200 ms on the basis of measurements on 10 periods for 50Hz, 12 periods
for 60Hz, and 80 periods for 400Hz, as indicated by Table 21.


9.1.2.6).

9.1.2.6. "1 s" quantities (one second)
The instrument calculates the following quantities every 200 ms on the basis of measurements on 50 periods for 50Hz, 60 periods
for 60Hz, and 400 periods for 400Hz, as indicated by Table 21.

the real-time values
the trends
9.1.2.7).


9.1.2.7. Aggregation
An aggregated quantity is a value calculated over an aggregation period as indicated by Table 22.
The aggregation period always starts at the beginning of an hour or of a minute. The aggregation period is the same for all quanti-
ties. The possible periods are the following: 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 and 60 min.
All aggregated quantities are recorded on the SD card during the recording session. They can be displayed in PEL Transfer (See § 5).
9.1.2.8. Minimum and maximum
The Min and Max are the minimum and maximum values observed during the aggregation period considered. They are recorded
with their dates and times (see Table 22). The Max of some aggregated values are displayed directly on the instrument.
9.1.2.9. Energy calculations
The energies are calculated every second.
The total energy is the demand during the recording session.
The partial energy can be determined for one of the following integration periods: 1h, 1 day, 1 week or 1 month. The partial energy
index is available only in real time. It is not recorded.
On the other hand, the total energies are available with the data of the recorded session.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chauvin Arnoux PEL105 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chauvin Arnoux PEL105 in the language / languages: English as an attachment in your email.

The manual is 11,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info